Universal Pass Through WiFi Range Extender WN3100RP
If the network is secure, the WPS LED lights green.
New Extender WiFi Network Name
The first time the extender connects to a WiFi network, the extender WiFi network name (SSID) changes to that network name, with _EXT at the end. For example:
•WiFi network name. MyNetworkName
•Extender network name. MyNetworkName_EXT
If the extender does not connect to the WiFi network, move the extender to a different location with a better WiFi signal. For example, you might need to move it closer to the router or gateway.
Join the Extender WiFi Network
After you install the extender, you can connect your clients to the extender WiFi network.
To join the extender network:
1.Take your computer or wireless device to the location with poor WiFi coverage.
2.Find the new extender network name (MyNetworkName_EXT).
3.Select this network and enter the same WiFi password that you use for your home network.
4.Within two minutes, check the arrow LEDs on the extender.
•If no arrow is lit, the location is good.
•When the extender connects to a network and a client joins the extender network, a blinking arrow LED indicates whether the extender is too far away from the router or wireless client.
Blinking Left Arrow. The extender is too far away from the router or gateway.
Blinking Right Arrow. The extender is too far away from your computer or wireless client.
5.Use the LED colors to monitor and adjust your connection.
For more information, see Monitor Extender Performance on page 17.
Note: If you are having trouble getting a good WiFi signal, try to create a better line of sight. For example, move the router or gateway up off the floor onto a table or desk, or move furniture that might be blocking the extender.
Getting Started
16