NETGEAR WN3100RP manual Use WPS to Add a Computer to the Extender’s Wireless Network

Universal Pass Through WiFi Range Extender WN3100RP

Use WPS to Add a Computer to the Extender’s Wireless Network

Use WPS (Wi-Fi Protected Setup) to connect a computer or wireless device to the extender network without entering the wireless network passphrase or key. Instead, you use a WPS button or enter a PIN to connect.

WPS supports WPA and WPA2 wireless security. If your extender network is open and no wireless security is set, then WPS automatically sets WPA2 + WPA wireless security on the extender network.

You can connect with WPS by either of the following methods:

•Use the WPS button on the side of the extender.

•Log in to the extender and click the onscreen WPS button.

To use the extender WPS button to connect: 1. Press the WPS button.

For two minutes, the extender attempts to add a wireless client (a computer or other wireless device) to its wireless network.

2.Within two minutes, press the WPS button on your wireless device, or follow the WPS instructions that came with your wireless device.

If your wireless device requests the WPS PIN of the extender, you can get it on the product label of the extender.

Your wireless device is now connected to the extender.

To log in to the extender and use WPS to connect:

1.Select Add WPS Client.

Extender Network Settings

25