NETGEAR WG302 manual Dhcp

Page 100

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

also Reverse ARP (RARP) which can be used by a host to discover its IP address. In this case, the host broadcasts its physical address and a RARP server replies with the host's IP address.

Auto Uplink

Auto UplinkTM technology (also called MDI/MDIX) eliminates the need to worry about crossover vs. straight-through Ethernet cables. Auto UplinkTM will accommodate either type of cable to make the right connection.

CA

A Certificate Authority is a trusted third-party organization or company that issues digital certificates used to create digital signatures and public-private key pairs.

Cat 5

Category 5 unshielded twisted pair (UTP) cabling. An Ethernet network operating at 10 Mbits/second (10BASE-T) will often tolerate low quality cables, but at 100 Mbits/second (10BASE-Tx) the cable must be rated as Category 5, or Cat 5 or Cat V, by the Electronic Industry Association (EIA).

This rating will be printed on the cable jacket. Cat 5 cable contains eight conductors, arranged in four twisted pairs, and terminated with an RJ45 type connector. In addition, there are restrictions on maximum cable length for both 10 and 100 Mbits/second networks.

Certificate Authority

A Certificate Authority is a trusted third-party organization or company that issues digital certificates used to create digital signatures and public-private key pairs.

The role of the CA in this process is to guarantee that the individual granted the unique certificate is, in fact, who he or she claims to be. Usually, this means that the CA has an arrangement with a financial institution, such as a credit card company, which provides it with information to confirm an individual's claimed identity. CAs are a critical component in data security and electronic commerce because they guarantee that the two parties exchanging information are really who they claim to be.

DHCP

An Ethernet protocol specifying how a centralized DHCP server can assign network configuration information to multiple DHCP clients. The assigned information includes IP addresses, DNS addresses, and gateway (router) addresses.

DMZ

Specifying a Default DMZ Server allows you to set up a computer or server that is available to anyone on the Internet for services that you haven't defined. There are security issues with doing this, so only do this if you'll willing to risk open access.

DNS

Short for Domain Name System (or Service), an Internet service that translates domain names into IP addresses.

2

Glossary

September 2004

Image 100
Contents September Technical Support Placement and Range Guidelines Declaration of Conformity Industry Canada Compliance Statement September Contents Chapter Management Appendix a Specifications Contents Chapter About This Manual Audience, Versions, ConventionsHow to Use this Manual Html version of this manualHow to Print this Manual About This Manual Chapter Introduction Key Features Supported Standards and ConventionsAutoCell-The Self-Organizing Wireless Network Autosensing Ethernet Connections with Auto Uplink 802.11g Standards-based Wireless NetworkingCompatible and Related Netgear Products System Requirements What’s In the Box?Following table explains the LED indicators Hardware DescriptionLED Description WG302 provides two detachable antenna This socket connects to the WG302 12V 1.2A power adapterMale DB-9 serial port for serial DTE connections Introduction Chapter Basic Installation and Configuration Observing Placement and Range GuidelinesCabling Requirements Default Factory Settings Feature Factory Default SettingsUnderstanding WG302 Wireless Security Options LUHOHVVDWD 6HFXULW\2SWLRQVInstalling the WG302 Access Point SET UP the WG302 Access PointLogin window Web browser will then display the WG302 settings Login result WG302 homeConfigure the settings appropriate for your network Basic Settings menuDeploy the WG302 Access Point Verify Wireless Connectivity How to Log In to the WG302 Using Its Default IP Address Understanding Basic Wireless Settings Basic Installation and Configuration Understanding WEP/WPA Security Options Wireless Security Settings Field Description Security Encryption Field Description WPA-PSK Wi-Fi Before You Change the Ssid and WEP Settings KeyHow to Set Up and Test Basic Wireless Connectivity How to Restrict Wireless Access by MAC Address Select the Turn Access Control On check boxTo configure WEP data encryption, follow these steps How to Configure WEPClick Apply to save your settings How to Configure WPA How to Configure WPA-PSKUsing the Basic IP Settings Options 10 Wireless Settings menuAccess Point Name NetBIOS Select the time zone location for your setting Time ZoneUsing the Secure Telnet Interface How to Use the CLI via the Console PortThese settings appear below the connector on the back panel Chapter ManagementCLI Commands Press the return key, and the screen below should appearUsing Syslog and Activity Log Information Syslog and Activity Log informationViewing General, Log, Station, and Statistical Information This screen shows the following parametersStatistics Field DescriptionWireless Access Point Status screen Statistics Fields Upgrading the Wireless Access Point Software Viewing a List of Attached DevicesConfiguration File Management Saving and Retrieving the Configuration Settings Backup menuUsing the Reset Button to Restore Factory Default Settings Restoring the WG302 to the Factory Default SettingsChanging the Administrator Password Set Password menu Management Chapter Advanced Configuration Understanding Advanced IP Settings for Wireless ClientsUnderstanding Advanced Wireless Settings AutoCell RF ManagementConfiguration AutoCell RF management is enabled by defaultAdditional AutoCell View Management Options Configuring Wireless LAN Parameters Table below describes the advanced wireless parametersEnabling Wireless Bridging and Repeating Advanced Wireless Settings Access Point Mode settingsHow to Configure a WG302 as a Point-to-Point Bridge Point-to-Point BridgeHow to Configure Multi Configure the Operating Mode WG302 AP1 on LANHow to Configure Wireless Repeating Advanced Configuration Chapter Troubleshooting No lights are lit on the access pointWireless LAN activity light does not light up LAN light is not litCannot connect to the WG302 to configure it When I enter a URL or IP address I get a timeout errorUsing the Reset Button to Restore Factory Default Settings Appendix a Specifications Specifications for the WG302Specifications Appendix B Wireless Networking Basics Wireless Networking OverviewInfrastructure Mode This chapter provides an overview of Wireless networkingAd Hoc Mode Peer-to-Peer Workgroup Authentication and WEP Data EncryptionNetwork Name Extended Service Set Identification Essid Authentication Open System AuthenticationShared Key Authentication $XWKHQWLFDWLRQ6WHSVOverview of WEP Parameters Sends Iteback TOO!0Key Size Wireless Channels WEP Configuration OptionsWPA Wireless Security How Does WPA Compare to WEP? What are the Key Features of WPA Security? How Does WPA Compare to Ieee 802.11i?Wireless Networking Basics Figure B-3 WPA Overview Access point replies with an EAP-request identity message Figure B-4 802.1x Authentication SequenceWPA Data Encryption Key Management Temporal Key Integrity Protocol Tkip Is WPA Perfect? Product Support for WPAOpen system, then 802.1x EAP with Radius or preshared key Open system, then 802.1x supplicant EAP or preshared keyChanges to Wireless Client Programs Appendix C Command Line Reference Command SetsCommand Line Reference Command Line Reference Command Line Reference Glossary Dhcp DSL Internet service provider Radius TLS Wins Glossary Index NumericsWEP B-3
Related manuals
Manual 34 pages 38.47 Kb