NETGEAR WG302 manual Open system, then 802.1x EAP with Radius or preshared key

Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302

Changes to Wireless Access Points

Wireless access points must have their firmware updated to support the following:

•The new WPA information element

To advertise their support of WPA, wireless APs send the beacon frame with a new 802.11 WPA information element that contains the wireless AP's security configuration (encryption algorithms and wireless security configuration information).

•The WPA two-phase authentication

Open system, then 802.1x (EAP with RADIUS or preshared key).

•TKIP

•Michael

•AES (optional)

To upgrade your wireless access points to support WPA, obtain a WPA firmware update from your wireless AP vendor and upload it to your wireless AP.

Changes to Wireless Network Adapters

Wireless networking software in the adapter, and possibly in the OS or client application, must be updated to support the following:

•The new WPA information element

Wireless clients must be able to process the WPA information element and respond with a specific security configuration.

•The WPA two-phase authentication

Open system, then 802.1x supplicant (EAP or preshared key).

•TKIP

•Michael

•AES (optional)

To upgrade your wireless network adapters to support WPA, obtain a WPA update from your wireless network adapter vendor and update the wireless network adapter driver.

For Windows wireless clients, you must obtain an updated network adapter driver that supports WPA. For wireless network adapter drivers that are compatible with Windows XP (Service Pack 1) and Windows Server 2003, the updated network adapter driver must be able to pass the adapter's WPA capabilities and security configuration to the Wireless Zero Configuration service.

Wireless Networking Basics B-17

September 2004