APC G50B-20A2 manual Specifications, Contact APC APV Technical Support Warranty

Page 16

Specifications

Input/Output

Input/Output Voltage

Nominal 120 V

Input/Output Current

20 A

Frequency

50/60 Hz

Receptacle Types

NEMA 5-20R

Number of Outlet Receptacles

9

Dimensions (HxWxL)

4.34 cm x 24 cm x 43.5 (1.71

 

in x 9.45 in 17.13 in)

 

 

Power Cord

2.4 m (8 ft.) right angle

 

NEMA 5-20P

 

 

AC Surge Performance

 

 

 

EMI/RFI Filtering

50 db 150 kHz to 1 MHz 40

 

dB to 30 MHz

 

 

Environmental Performance

Specifications

 

 

Operating temperature

0º – 40ºC (32º – 104ºF)

Storage temperature

-15º – 45ºC (5º – 113º F)

Net weight

4.36 kg (9.61 lbs)

Relative Humidity

0–95% non-condensing

Safety Agency Approval

UL1449, UL1363, cETLus Listed, FCC Part 15 Class B

Contact Information

www.apcav.com or 1-888-88APCAV

Contact APC APV Technical Support

For technical support, go to www.apcav.com or call 1-888-88APCAV (1-888-882-7228).

Warranty

APC warrants the G50B-20A2 (excluding the removable flashlight) to be free from defects in materials and workmanship under normal use and service for the lifetime of the original purchaser. APC warrants the removable flashlight to be free from defects in materials and workmanship under normal use and service for one year from the date of purchase. APC’s obligation under this warranty is limited to repairing or replacing, at its sole option, any such defective products. To obtain service under warranty you must obtain a Returned Material Authorization (RMA) number from APC or an APC Service Center with transportation charges prepaid and must be accompanied by a brief description of the problem and proof of date and place of purchase. This warranty applies only to the original purchaser.

12

APC A/V G-Type Rack Power Filter: Specifications

Image 16
Contents Installation and Operation Page Contents Specifications Safety General InformationOverview InventoryComponents Front viewRear view Removable FlashlightInstall the Unit InstallationConnect A/C Power Always On, Switched, and Delayed outlets Power-Saving Master and Controlled outletsConnect Components to the Unit Operation Basic FunctionsFront panel buttons Display interface LEDsConfigure the Unit Display Interface Menus Lock the unitShut down the unit Status menuSetup menu Power Threshold 10 W Tracking Power Successfully Save screen as default Troubleshooting Common problems and solutionsOverload indicator is illuminated Wiring OK indicator is not illuminatedSpecifications Contact APC APV Technical Support WarrantyInformación general IntroducciónInventario SeguridadComponentes Vista delanteraVista posterior Linterna desmontableInstalación de la unidad InstalaciónConexión al suministro de energía de CA Conexión de los componentes a la unidad Funcionamiento Funciones básicasBotones del panel delantero Indicadores luminosos de la interfaz de pantallaSuministrando a DELAY1 Configuración de la unidad Configuración del idiomaTomacorrientes de retardo de secuencia Visualización del estado de la unidadMenús de la interfaz de pantalla Tomacorrientes de detección de corrienteBloqueo de la unidad Desconexión de la unidadMenú Configuración Versión de firmwareAtenuador DE Indicadores Atenuar Guardado de pantalla como predeterminada Resolución de problemas Problemas comunes y solucionesLa unidad no se enciende El indicador luminoso Overload sobretensión está encendidoEspecificaciones Informations générales AperçuInventaire SécuritéComposants Vue avantVue arrière Lampe de poche amovibleInstallation de lappareil Installer lappareil sur une surface planeInstaller lappareil dans un rack ou dans un châssis Connexion de lalimentation secteurBranchement de périphériques à lappareil Prises toujours alimentées, commutées et à délaiFonctionnement Fonctions de baseBoutons de la façade Témoins lumineux de linterface daffichageTémoin Allumé Éteint Lumineux Configuration de lappareil Choix de la langueSéquence des prises à délai Affichage de létat de lappareilAffichage des menus de linterface Prises à détection de courantVerrouillage de lappareil Extinction de lappareilMenu Configuration Version du micrologicielSuivi Dalimentation Terminé Enregistrer lécran par défaut Problèmes habituels et solutions DépannageLappareil ne sallume pas Le témoin de surcharge est alluméContacter le service de soutien technique dAPC APV Garantie SpécificationsPage APC Worldwide Customer Support 990-3790B 05/2010