D-Link DI-707PD manual Using the Configuration Menu

Page 12

Using the Configuration Menu

Whenever you want to configure your network or the DI-707P, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the

DI-707P. The DI-707P default IP Address is shown below: Open the web browser

Type in the IP Address of the DI-707P

http://192.168.0.1

Note: if you have changed the default IP Address assigned to the DI-707P, make sure to enter the correct IP Address.

The factory default User name is admin and the default Password is blank (empty). It is recommended that you change the admin password for security purposes. Please refer to Tools>Admin to change the admin password.

Home > Wizard

The Home>Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard.

Clicking Apply will save changes made to the page

Apply

Clicking Cancel will clear changes made to the page

Cancel

Clicking Help will bring up helpful information regarding the page

Help

Clicking Restart will restart the router. (Necessary for some changes.)

Restart	11

Image 12

Contents Link DI-707P Page Contents Package Contents Introduction Connections Introduction to Broadband Router Technology Introduction to Firewalls Introduction to Virtual Private Networking Leds Getting Started Using the Configuration Menu Home WAN Choose WAN Type Dynamic IP AddressPPP over Ethernet OthersHome WAN Dynamic IP Address Host NameRenew IP Forever MAC AddressHome WAN Static IP Address PPPoE Account PPPoE Password Primary DNS Home WAN PPPoEHome WAN Pptp Password Login ServerHome WAN BigPond Cable AccountHome LAN Subnet MaskDomain Name Dhcp ServerEnable Service PortsServices Service IPAdvanced Application TriggerIncoming Ports Advanced MAC Filters Enabled or Disabled Advanced IP FilterAdvanced Domain Filter Enable SNMP- Local Remote Get Community Advanced SnmpPassword/Key Advanced DdnsProvider Advanced DMZ Advanced Routing Tools Admin Password Remote Management IP AddressTools Time Set Device Date TimeTools System Tools Firmware BrowseTools Misc Status Device Info Status Log Status Log Settings Help Installing the Print Server Software Click OK Configuring on Windows 98SE/ME Platforms Configuring on Windows XP/2000/NT Platforms Networking Basics Networking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Naming your Computer Right-click on My ComputerChecking the IP Address in Windows XP Computer nameAssigning a Static IP Address in Windows XP/2000 Network Connections Assigning a Static IP Address Windows XP/2000 Click on Internet Protocol TCP/IP Click PropertiesAssigning a Static IP Address with Macintosh OSX Select Built-in EthernetSelecting a Dynamic IP Address with Macintosh OSX Adding and Sharing Printers in Windows XP Other Networking TasksStart Printers Faxes Click on Add a printer Adding a local printer Select Local printer attached to this computerNetworking Basics Adding a local printer Adding a local printer Sharing a network printer Go to Start Printers and FaxesNetworking Basics Sharing a network printer Select Browse for a printer Go to Start Printers and Faxes Sharing an LPR printer Networking Basics Sharing an LPR printer Select Create a new portCustom Click Have Disk This screen will display information about your printer Resetting the DI-707P to the Factory Default Settings Technical Specifications Contacting Technical Support Warranty and Registration Page 11/27/2002