D-Link DI-707PD manual Tools Admin, Password Remote Management IP Address

Using the Configuration Menu

Tools> Admin

You can change the admin password here. It is recommended that you change the admin password from the default setting. The default password is blank (no password).

Password-

Remote Management-

IP Address-

To change the admin password, enter in the old password, and enter the new password twice to confirm

Remote Management allows the device to be configured through the WAN (Wide Area Network) port from the Internet using a web browser. A username and password is still required to access the browser-based management inter- face.

Internet IP Address of the computer that has access to the DI-707P. If the IP Address is set to 0.0.0.0, this allows all Internet IP addresses to access the DI-707P.

Port-	The port number used to access the DI-707P.
	E.g., http://x.x.x.x:88, where x.x.x.x. is the WAN IP address of
	the DI-707P and 88 is the port used for the Web Management
	interface.

28