D-Link DI-707PD manual Home LAN, Subnet Mask, Domain Name, Dhcp Server, IP Pool Starting Address

Using the Configuration Menu

Home > LAN

LAN is short for Local Area Network. This is considered your inter- nal network. These are the IP settings of the LAN interface for the DI-707P. These settings may be re- ferred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your inter- nal network and can- not be seen on the Internet.

DHCP stands for Dynamic Host Control Protocol. The DI-707P has a built-in DHCP server. The DHCP Server will automatically assign an IP address to the computers on the LAN/private network. Be sure to set your computers to be DHCP clients by setting their TCP/IP settings to “Obtain an IP Address Automatically.” When you turn your computers on, they will automatically load the proper TCP/IP settings provided by the DI-707P. The DHCP Server will automatically allocate an unused IP address from the IP address pool to the requesting computer. You must specify the starting and ending address of the IP address pool.

IP Address-	The IP address of the LAN interface.
	The default IP address is: 192.168.0.1
Subnet Mask-	The subnet mask of the LAN interface.
	The default subnet mask is 255.255.255.0
Domain Name-	(Optional) The name of your local domain
DHCP Server-	Enable or disable the DHCP service
IP Pool Starting
Address-	The starting IP address for the DHCP server’s IP assignment
IP Pool Ending
Address-	The ending IP address for the DHCP server’s IP assignment
Lease Time-	The length of time for the DHCP lease

DHCP Clients List- Lists the DHCP clients connected to the DI-707P. Click Refresh to update the list. The table will show the Host Name, IP Ad-

dress, and MAC Address of the DHCP client computer.

18