D-Link DI-707PD manual Tools Firmware, Browse

Page 32

Using the Configuration Menu

Tools > Firmware

You can upgrade the firmware by using this tool. First, check the D-Link support site for firmware updates at http://support.dlink.com. Make sure that the firmware you want to use is saved on the local hard drive of your computer. Click on Browse to search the local hard drive for the firmware that you downloaded from the D-Link website to be used for the update. Upgrading the firmware will not change any of your system settings but it is recommended that you save your system settings before doing a firmware upgrade.

Browse-	After you have downloaded the new firmware, click Browse in
	this window to locate the firmware update on your hard drive.
	Click Apply to complete the firmware upgrade.
	Note! Do not power off the unit when it is being upgraded. When the
	upgrade is complete, the unit will be restarted automatically.

31

Image 32

Contents Link DI-707P Page Contents Package Contents Introduction Connections Introduction to Broadband Router Technology Introduction to Firewalls Introduction to Virtual Private Networking Leds Getting Started Using the Configuration Menu Home WAN Choose WAN Type Dynamic IP AddressPPP over Ethernet OthersHome WAN Dynamic IP Address Host NameRenew IP Forever MAC AddressHome WAN Static IP Address PPPoE Account PPPoE Password Primary DNS Home WAN PPPoEHome WAN Pptp Password Login ServerHome WAN BigPond Cable AccountHome LAN Subnet MaskDomain Name Dhcp ServerEnable Service PortsServices Service IPIncoming Ports Advanced ApplicationTrigger Advanced MAC Filters Enabled or Disabled Advanced IP FilterAdvanced Domain Filter Enable SNMP- Local Remote Get Community Advanced SnmpProvider Password/KeyAdvanced Ddns Advanced DMZ Advanced Routing Tools Admin Password Remote Management IP AddressTools Time Set Device Date TimeTools System Tools Firmware BrowseTools Misc Status Device Info Status Log Status Log Settings Help Installing the Print Server Software Click OK Configuring on Windows 98SE/ME Platforms Configuring on Windows XP/2000/NT Platforms Networking Basics Networking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Naming your Computer Right-click on My ComputerChecking the IP Address in Windows XP Computer nameAssigning a Static IP Address in Windows XP/2000 Network Connections Assigning a Static IP Address Windows XP/2000 Click on Internet Protocol TCP/IP Click PropertiesAssigning a Static IP Address with Macintosh OSX Select Built-in EthernetSelecting a Dynamic IP Address with Macintosh OSX Adding and Sharing Printers in Windows XP Other Networking TasksStart Printers Faxes Click on Add a printer Adding a local printer Select Local printer attached to this computerNetworking Basics Adding a local printer Adding a local printer Sharing a network printer Go to Start Printers and FaxesNetworking Basics Sharing a network printer Select Browse for a printer Go to Start Printers and Faxes Sharing an LPR printer Networking Basics Sharing an LPR printer Select Create a new portCustom Click Have Disk This screen will display information about your printer Resetting the DI-707P to the Factory Default Settings Technical Specifications Contacting Technical Support Warranty and Registration Page 11/27/2002