D-Link DI-707PD manual Getting Started

Getting Started

With its default settings, the DI-707P, when activated, will connect with other D-Link Express Ethernetwork products, right out of the box.

Please refer to the following sections of this manual for additional information about setting up a network:

Networking Basics - learn how to check and assign your IP Address; share printers and files.

Using the Configuration Menu - learn the settings for the DI-707P, using the web- based interface.

1

2

5

4

3 6

For a typical network setup at home (as shown above), please do the following:

You will need broadband Internet access (a Cable or DSL subscription line into your home or office)

Consult with your Cable or DSL provider for proper installation of the modem

Connect the Cable or DSL modem to the DI-707P wireless broadband router (see the Quick Installation Guide included with the DI-707P.)

If you are connecting a desktop computer to your network, you can install the D-Link DFE-530TX+ethernet adapter into an available PCI slot. (See the Quick Installation Guide included with the DWL-530TX+.)

If you are connecting a laptop computer to your network, install the drivers for the Ethernet Cardbus adapter (e.g., D-LinkDFE-690TXD) into a laptop computer.(See the Quick Installation Guide included with the DFE-690TXD.)

Connect your printer to the printer port on the DI-707P. Please refer to the quick installation guide for loading the print server software.

10