D-Link DI-707PD manual Home WAN PPPoE, PPPoE Account PPPoE Password Primary DNS

Page 16

Using the Configuration Menu

Home > WAN > PPPoE

Most DSL users will select this option to obtain an IP address automatically from their ISP through the use of PPPoE.

PPPoE Account-

PPPoE Password-

Primary DNS-

Your PPPoE username is provided by your ISP

Your PPPoE password is provided by your ISP

You will get the DNS IP automatically from your ISP but you may enter a specific DNS address that you want to use instead.

Secondary DNS-

Maximum

Idle Time-

PPPoE Service Name-

Assigned

IP Address-

MTU-

(Optional) Input the secondary DNS address

Enter a maximum idle time during which Internet connection is maintained during inactivity. To disable this feature, enable Auto- reconnect.

(Optional) Check with your ISP for more information if they require the use of service name.

(Optional) Enter in the IP Address if you are assigned a static PPPoE address.

Maximum Transmission Unit; default is 1492; you may need to

change the MTU to conform to your ISP.	15

Image 16

Contents Link DI-707P Page Contents Package Contents Introduction Connections Introduction to Broadband Router Technology Introduction to Firewalls Introduction to Virtual Private Networking Leds Getting Started Using the Configuration Menu Home WAN Choose WAN Type Dynamic IP AddressPPP over Ethernet OthersHome WAN Dynamic IP Address Host NameRenew IP Forever MAC AddressHome WAN Static IP Address PPPoE Account PPPoE Password Primary DNS Home WAN PPPoEHome WAN Pptp Password Login ServerHome WAN BigPond Cable AccountHome LAN Subnet MaskDomain Name Dhcp ServerEnable Service PortsServices Service IPTrigger Advanced ApplicationIncoming Ports Advanced MAC Filters Enabled or Disabled Advanced IP FilterAdvanced Domain Filter Enable SNMP- Local Remote Get Community Advanced SnmpAdvanced Ddns Password/KeyProvider Advanced DMZ Advanced Routing Tools Admin Password Remote Management IP AddressTools Time Set Device Date TimeTools System Tools Firmware BrowseTools Misc Status Device Info Status Log Status Log Settings Help Installing the Print Server Software Click OK Configuring on Windows 98SE/ME Platforms Configuring on Windows XP/2000/NT Platforms Networking Basics Networking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Naming your Computer Right-click on My ComputerChecking the IP Address in Windows XP Computer nameAssigning a Static IP Address in Windows XP/2000 Network Connections Assigning a Static IP Address Windows XP/2000 Click on Internet Protocol TCP/IP Click PropertiesAssigning a Static IP Address with Macintosh OSX Select Built-in EthernetSelecting a Dynamic IP Address with Macintosh OSX Adding and Sharing Printers in Windows XP Other Networking TasksStart Printers Faxes Click on Add a printer Adding a local printer Select Local printer attached to this computerNetworking Basics Adding a local printer Adding a local printer Sharing a network printer Go to Start Printers and FaxesNetworking Basics Sharing a network printer Select Browse for a printer Go to Start Printers and Faxes Sharing an LPR printer Networking Basics Sharing an LPR printer Select Create a new portCustom Click Have Disk This screen will display information about your printer Resetting the DI-707P to the Factory Default Settings Technical Specifications Contacting Technical Support Warranty and Registration Page 11/27/2002