D-Link DIR-455 manual PPPoE

Page 21

Section 3 - Configuration

PPPoE

Choose this Internet connection if your ISP provides you PPPoE account.

Username:	The username/account name that your ISP provides
	to you for PPPoE dial-up.
Password:	Password that your ISP provides to you for PPPoE
	dial-up.
Verify Password:	Fill in with the same password in Password field.
Service Name:	(Optional) Fill in if provided by your ISP.
IP Address:	(Optional) Fill in if provided by your ISP. If not, keep
	the default value.
Primary DNS Server:	(Optional) Fill in if provided by your ISP. If not, keep
	the default value.
Secondary DNS Server:	(Optional) Fill in if provided by your ISP. If not, keep the default value.
MAC Address:	MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by pressing
	Clone Your PC’s MAC button. The Restore MAC button will reset the router to its default MAC address.
Maximum Idle Time:	The amount of time of inactivity before disconnecting established PPPoE session. Set it to zero or enable
Maximum Transmission	Auto-reconnect will disable this feature.
Maximum Transmission
Unit (MTU):	The default setting of PPPoE is 1492.
Auto-reconnect:	The device will dial-up PPPoE connection automatically.
	Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.

D-Link DIR-455 User Manual

17

Image 21

Contents Page Trademarks PrefaceTable of Contents Troubleshooting Wireless Basics ProductPackageOverviewContents Introduction Hardware Overview PowerRear Panel LAN4 LAN3 LAN2 LAN1 WAN SIMWAN LAN1 LAN2 LAN3 LAN4 Front PanelWPS SMS WlanWAN LEDsConnect to Your Network InstallationConnect a Telephone Wireless Installation Considerations Web-based Configuration Utility ConfigurationInternet Connection Setup Wizard Setup WizardClick Internet Connection Setup Wizard to begin Manual Internet Connection Setup and skip toPage Page Page Click Manual Internet Connection Setup to begin Manual Internet Connection SetupInternet Connection Type Internet ConnectionDynamic IP Dhcp PPPoE Reconnect Mode Address ModePptp IP Address Pptp Subnet MaskL2TP Subnet Mask L2TP IP AddressAuthentication Dialed NumberKeep Alive Static IP GRE Tunnel GRE SettingsTunnels Information Wireless Settings Wireless Network SettingsMode Wireless Security Mode Router Settings Network SettingsEnable Dhcp Server Dhcp Server SettingsDhcp Lease Time Secondary Wins IP AddressVPN Settings Page Encapsulation Protocol ESP, AH, or ESP+AH Tunnel 1 IKEPage Page Ipsec Proposal Settings IKE Proposal SettingsTunnel 1 Manual Key Page Encapsulation Protocol ESP, AH, or ESP+AH PFS Group XAuth Server ModePreshared Key Remote IDIKE Proposal Settings Message Service SMS InboxCreate Message Receiver CancelInbox RefreshVirtual Server EnableCopy to Virtual Servers ListApplication Rules Application RulesQOS Packet Filter QoS EngineLocal IP Ports QoS PriorityMAC Filtering Settings MAC Address FilterMAC Filtering Rules URL Filtering Rules URL FilterOutbound Filter Setting Outbound FilterOutbound Filter Rules List Intbound Filter Setting Inbound FilterInbound Filter Rules List Set Community SnmpRIP Setting RoutingRouting Rules Dtim Interval WMM Capable TX Rates Advanced WirelessAdvanced Network UpnpWAN Ping Admin AdministratorRemote Management Time ConfigurationTime Zone Set the Time and DateSyslog Mail Settings System Firmware Username / E-mail Enter the Username for your Dynamic DNSSystem Check Schedules Device Information Logs Statistics Wireless Support What is WEP? Wireless SecurityNext to Security Mode, select Enable WEP Security Configure WEPWhat is WPA? Configure WPA-PSK Configure WPA Radius Using Windows Vista Connect to a Wireless NetworkConfigure Wireless Security Page Using Windows XP Configure WEP Page Configure WPA-PSK Page Why can’t I access the web-based configuration utility? TroubleshootingWhat can I do if I forgot my password? Wireless Basics Wireless Personal Area Network Wpan Wireless Local Area Network WlanSmall Office and Home Office HomeCentralize your Router or Access Point Eliminate InterferenceSecurity Wireless Modes Check your IP address Networking BasicsStep Statically Assign an IP addressGSM Band GSM/GPRS/EDGE Technical SpecificationsDimensions L x W x H