
Section 3 - Configuration
Wireless Channel: | Indicates the channel setting for the DIR- |
| 455. By default the channel is set to 11. |
| This can be changed to fit the channel |
| setting for an existing wireless network or |
| to customize your wireless network. Click |
| Auto Channel Scan to automatically |
| select the channel that it will operate on. |
| This option is recommended because |
| the router will choose the channel with |
| the least amount of interference. |
Visibility Status: | Select Invisible if you do not want the |
| SSID of your wireless network to be |
| broadcasted by |
| of your router will not be seen by Site |
| Survey utilities. Therefore while setting |
| up your wireless clients, you will have |
| to manually enter your SSID to connect |
| to the router. |
| WIRELESS SECURITY MODE |
Security Mode: | This device supports three wireless security modes, WEP, |
| is the original wireless encryption standard. WPA provides a higher level of security and |
| does not require an authentication server. When WPA enterprise is enabled, the router uses EAP (802.1x) to |
| authenticate clients via a remote RADIUS server. |
Radius Server IP: | IP address of RADIUS server. |
Radius Port: | The port used for RADIUS server. The default port is 1812. |
Radius Shared Key: | Key value shared by RADIUS server and this device. |
| Please refer to Section 4 - Wireless Security for more information on security and encryption. |
| Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes. |
|
|
25 |