D-Link DI-514 manual Home WAN, Dynamic IP Address

Page 16

WAN

WAN is short for Wide Area Network. The WAN settings can be referred to as the Public settings. All IP information in the WAN settings are public IP addresses which are accessible on the Internet.

The WAN settings consist of three main options: Dynamic IP Address, Static IP Address, and PPPoE. Select the appropriate option and fill in the information needed to connect to your ISP.

Home > WAN

Please be sure to remove any existing PPPoE client software installed on your computers

Dynamic IP Address

Choose Dynamic IP Address to obtain IP address information automatically from your ISP. Select this option if your ISP does not give you any IP numbers to use. This option is commonly used for Cable modem services.

Host Name: The Host Name field is optional but may be required by some ISPs. The host name is the device name of the Router.

MAC Address: The default MAC address is set to the WAN's physical interface MAC address on the Broadband Router. You can use the "Clone MAC Address" button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with this MAC address. It is not recommended that you change the default MAC address unless required by your ISP.

16

Image 16
Contents Link Air DI-514 Contents Package Contents Introduction Connections Features and Benefits Leds Wireless Basics Wireless Basics Link Air DWL 700AP, DWL-AirPlus DWL-900AP+ DWL-2000AP+Link AirPlus DWL-800AP+ Link AirPlus DWL-810+Installation Considerations Link Air DWL-650 Getting StartedLink Air DWL-520 Setting Up an Infrastructure Network Getting StartedType admin in the User Name field lower case Using the Configuration MenuSetup Wizard Wireless Home WirelessHome Wizard Channel Key TypeHome WAN Dynamic IP AddressSecondary DNS Address optional PPPoE Home LAN Home Dhcp DhcpAdvanced Virtual Server Virtual ServerPage Advanced Applications Advanced Filters FiltersMAC Filters Advanced Firewall Domain BlockingAdvanced DMZ Advanced Performance Tools Admin Authentication Select Open system, Shared Key or AutoTools System System SettingsTime Tools Firmware Tools MiscStatus Device Info Log Settings Status LogStatus Wireless Connected Wireless Clients ListStatus Stats Traffic StatisticsTroubleshooting Configure the DI-514 Access PointTroubleshooting Manager Double-click on Network Resetting the DI-514 to Factory Default Settings Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Windows XP Right-click on My Computer Select Properties and clickComputer Name Tab in the System Properties window Click Change…Select Workgroup and enter the name of the Workgroup Area Connection icon in the task barSupport Tab Double-click on Control PanelAssigning a Static IP Address in Windows XP/2000 Highlight Internet Protocol TCP/IP Preferences Select Built-in EthernetInput the Static IP Address, Subnet Mask and the Router IP Click Apply NowSystem Preferences Select Built-in Ethernet in the Show pull-down menuFor Windows XP For Windows ME and 98SETechnical Specifications Encryption 64/128 bit RC4 Media Access ControlStandards VPN Pass Through / Multi-SessionsWireless Transmit Power 15dBm ± 2dB External Antenna Type Operating Temperature 32F to 131F 0C to 55C HumidityPower Input Safety & EmissionsTechnical Support Technical SupportWarranty USA only Page Important Note Page Registration