D-Link DI-514 manual Select Workgroup and enter the name of the Workgroup

Page 48

Networking Basics

Naming your Computer

•In this window, enter the Computer name.

•Select Workgroup and enter the name of the Workgroup.

•All computers on your network must have the same Workgroup name.

•Click OK

Checking the IP Address in Windows XP

The wireless adapter-equipped computers in your network must be in the same IP Address range (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following:

•Right-click on the Local

Area Connection icon in the task bar

•Click on Status

48

Image 48

Contents Link Air DI-514 Contents Package Contents Introduction Connections Features and Benefits Leds Wireless Basics Wireless Basics Link Air DWL 700AP, DWL-AirPlus DWL-900AP+ DWL-2000AP+Link AirPlus DWL-800AP+ Link AirPlus DWL-810+Installation Considerations Getting Started Link Air DWL-650Link Air DWL-520 Setting Up an Infrastructure Network Getting StartedUsing the Configuration Menu Type admin in the User Name field lower caseSetup Wizard Home Wireless WirelessHome Wizard Channel Key TypeHome WAN Dynamic IP AddressSecondary DNS Address optional PPPoE Home LAN Home Dhcp DhcpAdvanced Virtual Server Virtual ServerPage Advanced Applications Advanced Filters FiltersMAC Filters Advanced Firewall Domain BlockingAdvanced DMZ Advanced Performance Tools Admin Authentication Select Open system, Shared Key or AutoSystem Settings Tools SystemTime Tools Firmware Tools MiscStatus Device Info Log Settings Status LogStatus Wireless Connected Wireless Clients ListStatus Stats Traffic StatisticsTroubleshooting Configure the DI-514 Access PointTroubleshooting Manager Double-click on Network Resetting the DI-514 to Factory Default Settings Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Windows XP Right-click on My Computer Select Properties and clickComputer Name Tab in the System Properties window Click Change…Select Workgroup and enter the name of the Workgroup Area Connection icon in the task barSupport Tab Double-click on Control PanelAssigning a Static IP Address in Windows XP/2000 Highlight Internet Protocol TCP/IP Preferences Select Built-in EthernetInput the Static IP Address, Subnet Mask and the Router IP Click Apply NowSystem Preferences Select Built-in Ethernet in the Show pull-down menuFor Windows XP For Windows ME and 98SETechnical Specifications Encryption 64/128 bit RC4 Media Access ControlStandards VPN Pass Through / Multi-SessionsWireless Transmit Power 15dBm ± 2dB External Antenna Type Operating Temperature 32F to 131F 0C to 55C HumidityPower Input Safety & EmissionsTechnical Support Technical SupportWarranty USA only Page Important Note Page Registration