D-Link DI-514 manual Home LAN

Page 19

your ISP.

Auto-reconnect:If enabled, the Broadband Router will automatically connect to your ISP after your system is restarted or if the connection is dropped.

Home > LAN

LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DI-514. These settings may be referred to as Private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

IP Address: The IP address of the LAN interface. The default IP address is 192.168.0.1.

Subnet Mask: The subnet mask of the LAN interface. The default subnet mask is 255.255.255.0.

Local Domain Name: This field is optional. Enter in the your local domain name.

19

Image 19
Contents Link Air DI-514 Contents Package Contents Introduction Connections Features and Benefits Leds Wireless Basics Link AirPlus DWL-810+ Wireless BasicsLink Air DWL 700AP, DWL-AirPlus DWL-900AP+ DWL-2000AP+ Link AirPlus DWL-800AP+Installation Considerations Link Air DWL-650 Getting StartedLink Air DWL-520 Getting Started Setting Up an Infrastructure NetworkType admin in the User Name field lower case Using the Configuration MenuSetup Wizard Wireless Home WirelessHome Wizard Key Type ChannelDynamic IP Address Home WANSecondary DNS Address optional PPPoE Home LAN Dhcp Home DhcpVirtual Server Advanced Virtual ServerPage Advanced Applications Filters Advanced FiltersMAC Filters Domain Blocking Advanced FirewallAdvanced DMZ Advanced Performance Authentication Select Open system, Shared Key or Auto Tools AdminTools System System SettingsTime Tools Misc Tools FirmwareStatus Device Info Status Log Log SettingsTraffic Statistics Status WirelessConnected Wireless Clients List Status StatsConfigure the DI-514 Access Point TroubleshootingTroubleshooting Manager Double-click on Network Resetting the DI-514 to Factory Default Settings Networking Basics Using the Network Setup Wizard in Windows XPNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Click Change… Windows XPRight-click on My Computer Select Properties and click Computer Name Tab in the System Properties windowArea Connection icon in the task bar Select Workgroup and enter the name of the WorkgroupDouble-click on Control Panel Support TabAssigning a Static IP Address in Windows XP/2000 Highlight Internet Protocol TCP/IP Click Apply Now PreferencesSelect Built-in Ethernet Input the Static IP Address, Subnet Mask and the Router IPSelect Built-in Ethernet in the Show pull-down menu System PreferencesFor Windows ME and 98SE For Windows XPVPN Pass Through / Multi-Sessions Technical SpecificationsEncryption 64/128 bit RC4 Media Access Control StandardsSafety & Emissions Wireless Transmit Power 15dBm ± 2dB External Antenna TypeOperating Temperature 32F to 131F 0C to 55C Humidity Power InputTechnical Support Technical SupportWarranty USA only Page Important Note Page Registration