D-Link DI-514 manual Advanced Performance

Page 28

Advanced > Performance

Beacon Interval - Beacons are packets sent by an Access Point to synchronize a wireless network. Specify a value. 100 is the default setting and is recommended.

RTS Threshold - This value should remain at its default setting of 2432. If inconsistent data flow is a problem, only a minor modification should be made.

Fragmentation - This value should also remain at its default setting of 2346. If you experience a high packet error rate, you may slightly increase your Fragmentation Threshold within the value range of 256 to 2,346. Setting the Fragmentation Threshold too low may result in poor performance.

DTIM - (Delivery Traffic Indication Message) 3 is the default setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.

Basic Rates – Select the data rate. Default is 1-2-5.5-11Mbps.

28

Image 28
Contents Link Air DI-514 Contents Package Contents Introduction Connections Features and Benefits Leds Wireless Basics Wireless Basics Link Air DWL 700AP, DWL-AirPlus DWL-900AP+ DWL-2000AP+Link AirPlus DWL-800AP+ Link AirPlus DWL-810+Installation Considerations Link Air DWL-650 Getting StartedLink Air DWL-520 Setting Up an Infrastructure Network Getting StartedType admin in the User Name field lower case Using the Configuration MenuSetup Wizard Wireless Home WirelessHome Wizard Channel Key TypeHome WAN Dynamic IP AddressSecondary DNS Address optional PPPoE Home LAN Home Dhcp DhcpAdvanced Virtual Server Virtual ServerPage Advanced Applications Advanced Filters FiltersMAC Filters Advanced Firewall Domain BlockingAdvanced DMZ Advanced Performance Tools Admin Authentication Select Open system, Shared Key or AutoTools System System SettingsTime Tools Firmware Tools MiscStatus Device Info Log Settings Status LogStatus Wireless Connected Wireless Clients ListStatus Stats Traffic StatisticsTroubleshooting Configure the DI-514 Access PointTroubleshooting Manager Double-click on Network Resetting the DI-514 to Factory Default Settings Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Windows XP Right-click on My Computer Select Properties and clickComputer Name Tab in the System Properties window Click Change…Select Workgroup and enter the name of the Workgroup Area Connection icon in the task barSupport Tab Double-click on Control PanelAssigning a Static IP Address in Windows XP/2000 Highlight Internet Protocol TCP/IP Preferences Select Built-in EthernetInput the Static IP Address, Subnet Mask and the Router IP Click Apply NowSystem Preferences Select Built-in Ethernet in the Show pull-down menuFor Windows XP For Windows ME and 98SETechnical Specifications Encryption 64/128 bit RC4 Media Access ControlStandards VPN Pass Through / Multi-SessionsWireless Transmit Power 15dBm ± 2dB External Antenna Type Operating Temperature 32F to 131F 0C to 55C HumidityPower Input Safety & EmissionsTechnical Support Technical SupportWarranty USA only Page Important Note Page Registration