D-Link DI-514 manual Wireless Transmit Power 15dBm ± 2dB External Antenna Type, LEDs, Power Input

Page 56

•2Mbps(DQPSK)

•1Mbps(DBPSK)

Wireless Transmit Power 15dBm ± 2dB

External Antenna Type

Single detachable reverse SMA

LEDs

•Power

•M1

•M2

•WAN

•Local Network—10/100

•WLAN (Wireless Connection)

Operating Temperature 32°F to 131°F ( 0°C to 55°C)

Humidity

95% maximum (non-condensing)

Power Input

Power Supply DC 5V, 2.5A

Safety & Emissions

•FCC

•UL

Dimensions

•L = 5.6 inches (142mm)

•W = 4.3 inches (109mm)

•H = 1.2 inches (31mm)

Weight

~2.0 lbs (907g)

Warranty

1 year

*Maximum Wireless signal rate based on IEEE Standard 802.11b specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of traffic, building materials and construction, and network overhead lower actual data throughput rate.

56

Image 56

Contents Link Air DI-514 Contents Package Contents Introduction Connections Features and Benefits Leds Wireless Basics Wireless Basics Link Air DWL 700AP, DWL-AirPlus DWL-900AP+ DWL-2000AP+Link AirPlus DWL-800AP+ Link AirPlus DWL-810+Installation Considerations Link Air DWL-520 Getting StartedLink Air DWL-650 Setting Up an Infrastructure Network Getting StartedSetup Wizard Using the Configuration MenuType admin in the User Name field lower case Home Wizard Home WirelessWireless Channel Key TypeHome WAN Dynamic IP AddressSecondary DNS Address optional PPPoE Home LAN Home Dhcp DhcpAdvanced Virtual Server Virtual ServerPage Advanced Applications Advanced Filters FiltersMAC Filters Advanced Firewall Domain BlockingAdvanced DMZ Advanced Performance Tools Admin Authentication Select Open system, Shared Key or AutoTime System SettingsTools System Tools Firmware Tools MiscStatus Device Info Log Settings Status LogStatus Wireless Connected Wireless Clients ListStatus Stats Traffic StatisticsTroubleshooting Configure the DI-514 Access PointTroubleshooting Manager Double-click on Network Resetting the DI-514 to Factory Default Settings Using the Network Setup Wizard in Windows XP Networking BasicsNetworking Basics Enter a Computer description and a Computer name optional Networking Basics Networking Basics Networking Basics Network Setup Wizard Windows XP Right-click on My Computer Select Properties and clickComputer Name Tab in the System Properties window Click Change…Select Workgroup and enter the name of the Workgroup Area Connection icon in the task barSupport Tab Double-click on Control PanelAssigning a Static IP Address in Windows XP/2000 Highlight Internet Protocol TCP/IP Preferences Select Built-in EthernetInput the Static IP Address, Subnet Mask and the Router IP Click Apply NowSystem Preferences Select Built-in Ethernet in the Show pull-down menuFor Windows XP For Windows ME and 98SETechnical Specifications Encryption 64/128 bit RC4 Media Access ControlStandards VPN Pass Through / Multi-SessionsWireless Transmit Power 15dBm ± 2dB External Antenna Type Operating Temperature 32F to 131F 0C to 55C HumidityPower Input Safety & EmissionsTechnical Support Technical SupportWarranty USA only Page Important Note Page Registration