Linksys BEFSR81 manual Getting to Know the Router

Page 12

EtherFast Cable/DSL Router with 8-Port Switch

Chapter 3: Getting to Know the Router

The Back Panel

The Router’s ports and the Reset button are located on the back panel of the Router.

 

Figure 3-1: Back Panel

Internet

This Internet port connects to your cable or DSL modem.

1-8

These eight Ethernet ports connect to network devices, such as PCs, print servers, or

 

additional switches.

Reset Button

The Reset button can be used in one of two ways:

 

If the Router is having problems connecting to the Internet, press the Reset button for just a

 

second with a paper clip or a pencil tip. This is similar to pressing the Reset button on your PC

 

to reboot it.

 

If you are experiencing extreme problems with the Router and have tried all other

 

troubleshooting measures, press and hold in the Reset button for 30 seconds. This will restore

 

the factory defaults and clear all of the Router’s settings, such as port forwarding or a new

 

password.

Power

The Power port is where you will connect the power adapter.

Chapter 3: Getting to Know the Router

6

The Back Panel

Image 12
Contents Cable/DSL Router How to Use this Guide Copyright and TrademarksWord definition Table of Contents Appendix a Troubleshooting Common Problems and Solutions Frequently Asked QuestionsAppendix B Upgrading Firmware Ethernet AdapterList of Figures Back PanelDdns Disabled Introduction WelcomeWhat’s in this Guide? EtherFast Cable/DSL Router with 8-Port Switch Networking Basics An Introduction to LANsUse of IP Addresses Networking Basics Use of IP Addresses Reset Button Reset button can be used in one of two ways Getting to Know the RouterFront Panel Connecting the Router OverviewConnection Instructions Connect a PCConfiguring the PCs Configuring Windows 98 and Millennium PCsConfiguring Windows 2000 PCs Configuring Windows XP PCsInternet Protocol TCP/IP for Windows XP Configuring the Router InstructionsObtain an IP Automatically or Dhcp Static IPPPPoE RASHeart Beat Signal PptpUsing The Router’s Web-based Utility SetupNavigating the Utility SecurityQuick and Easy Administration AdministrationApplications & Gaming StatusBasic Setup Internet SetupRAS for SingTel PPPoEHeart Beat Signal PptpNetwork Setup Optional SettingsRouter IP Network Address Server Settings Dhcp DdnsMAC Address Clone DynDNS.orgTZO.com Advanced Routing MAC CloneFilter 14 Routing TableFilter IP Address Range Filter Port RangeFilter MAC Address Block WAN RequestsVPN Passthrough Port Range ForwardingPort Range Port Triggering Triggered RangeForwarded Range UPnP Forwarding 20 UPnP ForwardingDMZ QoS QoSApplication-based QoS Router Access Local Router AccessManagement Port-based QoSRemote Router Access IdentificationLog UPnPFactory Defaults 25 Incoming Log TableFirmware Upgrade Upgrade FirmwareRouter InformationLocal Network 31 Local NetworkAppendix a Troubleshooting Common Problems and SolutionsFor Windows 98 and Millennium For WindowsFor Windows XP For Windows 98 and Millennium EtherFast Cable/DSL Router with 8-Port Switch Am not able to access the Router’s Web-based Utility Setup Need to set up a server behind my RouterApplication Start and End Protocol IP Address Enabled TCPCan’t get the Internet game, server, or application to work To start over, I need to set the Router to factory default Need to upgrade the firmwareFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherFirmware upgrade failed My DSL service’s PPPoE is always disconnectingNeed to use port triggering Frequently Asked Questions Where is the Router installed on the network?Is IPSec Passthrough supported by the Router? Does the Router support IPX or AppleTalk?How can I block corrupted FTP downloads? What is DMZ Hosting? Will the Router function in a Macintosh environment?Is the Router cross-platform compatible? How many ports can be simultaneously forwarded?How can I check whether I have static or Dhcp IP addresses? How do I get mIRC to work with the Router?Figure B-1 Upgrade Firmware Appendix B Upgrading FirmwareWindows 98 or Me Instructions Windows 2000 or XP InstructionsFor the Router’s Web-based Utility Figure C-3 MAC Address/Physical AddressAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix E Glossary EtherFast Cable/DSL Router with 8-Port Switch EtherFast Cable/DSL Router with 8-Port Switch EtherFast Cable/DSL Router with 8-Port Switch EtherFast Cable/DSL Router with 8-Port Switch EtherFast Cable/DSL Router with 8-Port Switch Appendix F Specifications Eight 10/100 RJ-45 Switched PortsStandards PortsAppendix G Warranty Information Limited WarrantyAppendix H Regulatory Information FCC StatementAppendix I Contact Information Need to contact Linksys?Information section in this Guide
Related manuals
Manual 26 pages 4.32 Kb