Linksys RV0041 manual Dhcp Tab, System Management Tab, Port Management Tab

Page 21

10/100/1000 4-Port VPN Router

•MAC Clone. Some ISPs require that you register a MAC address. From this screen, you can “clone” your network adapter's MAC address onto the Router. This prevents you from having to call your ISP to change the registered MAC address to the Router's MAC address.

•DDNS. DDNS (Dynamic DNS) service, on this screen, allows you to assign a fixed domain name to a dynamic Internet IP address. This allows you to host your own Web, FTP or other type of TCP/IP server in your network.

•Advanced Routing. The Router's dynamic routing feature can be set up on this screen to automatically adjust to physical changes in the network's layout.

DHCP Tab

•Setup. From this screen, you can enable/disable the DHCP server, set up client lease time, DHCP IP Range, and the WINS Server IP address.

•Status. This Status page is available to review DHCP Server Status.

System Management Tab

•SNMP. SNMP, or Simple Network Management Protocol, is a network protocol that provides network administrators with the ability to monitor the status of the Router and receive notification of any critical events as they occur on the network. SNMP can be managed from this screen.

•Diagnostic. From this screen, you can use the Router’s two built-in tools to troubleshoot network problems.

•Factory Default. The “Factory Default” button on this screen can be used to clear all of your configuration information and restore the Router to its factory default settings. Only use this feature if you wish to discard all other configuration preferences.

•Firmware Upgrade. Users can use the function on this screen to upgrade the Router’s firmware to the newest version.

•Restart. The recommended method of restarting your Router is to use the “Restart Router” button on this screen. Restarting with this button will send out your log file before the box is reset.

•Setting Backup. This screen allows you to make or import a backup file of your Preferences file for the Router.

Port Management Tab

•Port Setup. From this screen, users can configure the functionality for each port.

•Port Status. Users can choose this screen to see the status of a selected port.

Chapter 5: Setting Up and Configuring the Router

DDNS: the capability of having a website, FTP, or e-mail server-with a dynamic IP address-use a fixed domain name

13

Overview

Page 20 Page 22
Image 21
Page 20 Page 22
Contents 10/100/1000 4-Port Word definition Copyright and TrademarksTable of Contents Appendix C Physical Setup of the Router Appendix a TroubleshootingAppendix D Battery Replacement Setting up the Router10/100/1000 4-Port VPN Router Computer-to-VPN Router VPN VPN Router-to-VPN Router VPN24 System Management Tab DNS Name Lookup 54 Basic Setup Wizard Host and Domain Name Introduction WelcomeIP a protocol used to send data over a network Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? Networking Basics An Introduction to LANsUse of IP Addresses MAC Address Spoofing Why do I need a VPN?There are two basic ways to create a VPN connection What is a VPN?VPN Router-to-VPN Router VPN VPN Router to VPN RouterSFP Getting to Know the RouterButton on your PC to reboot it Reset Button Reset button can be used in one of two waysForwarding or a new password Proceed to Connecting the Router Connecting the Router Overview VPN Router Connection Instructions Setting Up and Configuring the RouterSetting Up and Configuring the Router Setup TabSystem Summary Tab Dhcp Tab System Management TabPort Management Tab VPN Tab Firewall TabLog Tab Wizard TabConfiguration How to Access the Web-based UtilitySystem Summary Tab System InformationNetwork Setting Status Firewall Setting StatusPort Statistics Log Setting Status VPN Setting StatusWAN Interface Setting LAN SettingNetwork WAN Connection TypeStatic IP PPPoE Point-to-Point Protocol over Ethernet most DSL usersPptp Point-to-Point Tunneling Protocol Setup Tab Password Setup Tab TimeTime Setup Tab Forwarding Setup Tab DMZ HostSelect the Service from the pull-down menu, shown in Figure Port Range ForwardingPort Triggering Setup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingSetup Dhcp Tab SetupDynamic IP Static IPSystem Management Tab Snmp Dhcp Tab StatusDNS Name Lookup System Management Tab DiagnosticPing Lookup tool may be used to find the IP addressSystem Management Tab Firmware Upgrade System Management Tab Factory DefaultFirmware Upgrade Firmware DownloadImport Configuration File System Management Tab Setting BackupExport Configuration File System Management Tab RestartBasic Per Port Config Port Management Tab Port Setup32 Port Management Tab Port Status Port Management Tab Port Status33 Firewall Tab General Firewall Tab General34 Firewall Tab Access Rules Firewall Tab Access RulesAdd a New Access Rule ServicesScheduling Editing an Access Rule Firewall Tab Content FilterForbidden Domains SchedulingVPN Tab Summary SummaryTunnel Status 37 VPN Tab Summary Detail GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup40 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupManual IPSec SetupIKE with Preshared Key automatic 10/100/1000 4-Port VPN Router 42 VPN tab Gateway to Gateway Advanced AdvancedVPN Tab Client to Gateway With Tunnel Enabled45 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 46 VPN tab Client to Gateway IPSec Setup IKE with Preshared Key automatic 47 VPN tab Client to Gateway Advanced Tunnel mode, it will also be limited as Aggressive ModeCompress Support IP Payload compression Protocol IP Comp VPN Tab VPN Pass ThroughLog Tab System Log Log SettingSyslog Mail51 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup55 Basic Setup Wizard Selecting WAN Connection Types 57 Access Rule Wizard What is Access Rules Access Rule Setup59 Access Rule Wizard Select the Service 61 Access Rule Wizard Select the Destination Logout Tab Support TabOn Line Manual Linksys Web SiteCommon Problems and Solutions Appendix a TroubleshootingFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows XP For WindowsFor Windows 98 and Millennium 10/100/1000 4-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupWeb server 80 to Both 192.168.1.100 FTP server 21 to Application Start and End Protocol IP Address Enable500 to Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Click the DMZ Host tabNeed to upgrade the firmware To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Where is the Router installed on the network? Frequently Asked QuestionsRouter will support up to 253 IP addresses Is IPSec Passthrough supported by the Router?How can I block corrupted FTP downloads? What is DMZ Hosting? Router allows Pptp packets to pass throughIs the Router cross-platform compatible? Which modems are compatible with the Router? How many ports can be simultaneously forwarded?How can I check whether I have static or Dhcp IP addresses? Ask your ISP to find outWindows 2000 or XP Instructions Windows 98 or Me InstructionsFigure B-3 MAC Address/Physical Address For the Router’s Web-based UtilitySetting up the Router Appendix C Physical Setup of the RouterPlacement of the Router Rack-Mounting the Router10/100/1000 4-Port VPN Router Figure C-3 Wall-Mounting the Router Wall-Mounting the RouterFigure C-4 Wall-Mounting Hardware Appendix D Battery Replacement Replacing a Lithium BatteryThis section instructs the user on battery replacement Appendix E Upgrading Firmware Figure E-1 Upgrade FirmwareAppendix F Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix G Glossary 10/100/1000 4-Port VPN Router 10/100/1000 4-Port VPN Router 10/100/1000 4-Port VPN Router Standards Ieee 802.3, 802.3u Ports Appendix H SpecificationsSFP Port 10/100/100 Gigabit Ports, 1 10/100 RJ-45 Internet PortLimited Warranty Appendix I Warranty InformationFCC Statement Appendix J Regulatory InformationNeed to contact Linksys? Appendix K Contact InformationInformation section in this Guide Linksys
Top Page Image Contents