Linksys RV0041 manual Application Start and End Protocol IP Address Enabled, 500 to

Page 75

10/100/1000 4-Port VPN Router

example, if you have a web server, you would enter the range 80 to 80. Click the Add to List button. Then click the Save Setting button. Click the Exit button.

C.Enter the IP Address of the server that you want the Internet users to access. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the field provided. Check “Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address. Then check the Enable checkbox for the entry. Consider the examples below:

Application

Start and End

Protocol

IP Address

Enabled

 

 

 

 

 

UT

7777 to 27900

Both

192.168.1.100

X

 

 

 

 

 

Halflife

27015 to 27015

Both

192.168.1.105

X

 

 

 

 

 

PC Anywhere

5631 to 5631

UDP

192.168.1.102

X

 

 

 

 

 

VPN IPSEC

500 to 500

UDP

192.168.1.100

X

 

 

 

 

 

D.Click the Add to List button, and configure as many entries as you like. When you have completed the configuration, click the Save Settings button.

8.I can’t get the Internet game, server, or application to work.

If you are having difficulties getting any Internet game, server, or application to function properly, consider exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an application requires too many ports or when you are not sure which port services to use. Make sure you disable all the forwarding entries if you want to successfully use DMZ hosting, since forwarding has priority over DMZ hosting. (In other words, data that enters the Router will be checked first by the forwarding settings. If the port number that the data enters from does not have port forwarding, then the Router will send the data to whichever PC or network device you set for DMZ hosting.) Follow these steps to set DMZ hosting:

A.Access the Router’s Web-based Utility by going to http://192.168.1.1 or the IP address of the Router. Go to the Setup => Forwarding tab.

B.Disable or remove the entries you have entered for forwarding. To delete an entry, select it and then click the Delete selected application button. Keep this information in case you want to use it at a later time.

C.Click the DMZ Host tab.

D.Enter the Ethernet adapter’s IP address of the computer you want exposed to the Internet. This will bypass the NAT security for that computer. Please refer to “Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter” for details on getting an IP address.

Once completed with the configuration, click the Save Settings button.

Appendix A: Troubleshooting

67

Common Problems and Solutions

Image 75
Contents 10/100/1000 4-Port Word definition Copyright and TrademarksTable of Contents Setting up the Router Appendix a TroubleshootingAppendix C Physical Setup of the Router Appendix D Battery Replacement10/100/1000 4-Port VPN Router Computer-to-VPN Router VPN VPN Router-to-VPN Router VPN24 System Management Tab DNS Name Lookup 54 Basic Setup Wizard Host and Domain Name Introduction WelcomeIP a protocol used to send data over a network Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? Networking Basics An Introduction to LANsUse of IP Addresses MAC Address Spoofing Why do I need a VPN?There are two basic ways to create a VPN connection What is a VPN?VPN Router-to-VPN Router VPN VPN Router to VPN RouterSFP Getting to Know the RouterProceed to Connecting the Router Reset Button Reset button can be used in one of two waysButton on your PC to reboot it Forwarding or a new passwordConnecting the Router OverviewVPN Router Connection Instructions Setting Up and Configuring the RouterSetting Up and Configuring the Router Setup TabSystem Summary Tab Dhcp Tab System Management TabPort Management Tab Wizard Tab Firewall TabVPN Tab Log TabSystem Information How to Access the Web-based UtilityConfiguration System Summary TabNetwork Setting Status Firewall Setting StatusPort Statistics Log Setting Status VPN Setting StatusWAN Connection Type LAN SettingWAN Interface Setting NetworkStatic IP PPPoE Point-to-Point Protocol over Ethernet most DSL usersPptp Point-to-Point Tunneling Protocol Setup Tab Password Setup Tab TimeTime Setup Tab Forwarding Setup Tab DMZ HostSelect the Service from the pull-down menu, shown in Figure Port Range ForwardingPort Triggering Setup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingStatic IP Dhcp Tab SetupSetup Dynamic IPSystem Management Tab Snmp Dhcp Tab StatusLookup tool may be used to find the IP address System Management Tab DiagnosticDNS Name Lookup PingFirmware Download System Management Tab Factory DefaultSystem Management Tab Firmware Upgrade Firmware UpgradeSystem Management Tab Restart System Management Tab Setting BackupImport Configuration File Export Configuration FileBasic Per Port Config Port Management Tab Port Setup32 Port Management Tab Port Status Port Management Tab Port Status33 Firewall Tab General Firewall Tab General34 Firewall Tab Access Rules Firewall Tab Access RulesAdd a New Access Rule ServicesScheduling Scheduling Firewall Tab Content FilterEditing an Access Rule Forbidden DomainsVPN Tab Summary SummaryTunnel Status 37 VPN Tab Summary Detail GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup40 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupManual IPSec SetupIKE with Preshared Key automatic 10/100/1000 4-Port VPN Router 42 VPN tab Gateway to Gateway Advanced AdvancedVPN Tab Client to Gateway With Tunnel Enabled45 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 46 VPN tab Client to Gateway IPSec Setup IKE with Preshared Key automatic 47 VPN tab Client to Gateway Advanced Tunnel mode, it will also be limited as Aggressive ModeCompress Support IP Payload compression Protocol IP Comp VPN Tab VPN Pass ThroughMail Log SettingLog Tab System Log Syslog51 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup55 Basic Setup Wizard Selecting WAN Connection Types 57 Access Rule Wizard What is Access Rules Access Rule Setup59 Access Rule Wizard Select the Service 61 Access Rule Wizard Select the Destination Linksys Web Site Support TabLogout Tab On Line ManualNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions For Windows 98 and MillenniumFor Windows XP For WindowsFor Windows 98 and Millennium 10/100/1000 4-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupWeb server 80 to Both 192.168.1.100 FTP server 21 to Application Start and End Protocol IP Address EnableClick the DMZ Host tab Application Start and End Protocol IP Address Enabled500 to Can’t get the Internet game, server, or application to workFor Netscape 4.7 or higher To start over, I need to set the Router to factory defaultNeed to upgrade the firmware For Microsoft Internet Explorer 5.0 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Is IPSec Passthrough supported by the Router? Frequently Asked QuestionsWhere is the Router installed on the network? Router will support up to 253 IP addressesHow can I block corrupted FTP downloads? What is DMZ Hosting? Router allows Pptp packets to pass throughIs the Router cross-platform compatible? Ask your ISP to find out How many ports can be simultaneously forwarded?Which modems are compatible with the Router? How can I check whether I have static or Dhcp IP addresses?Windows 2000 or XP Instructions Windows 98 or Me InstructionsFigure B-3 MAC Address/Physical Address For the Router’s Web-based UtilityRack-Mounting the Router Appendix C Physical Setup of the RouterSetting up the Router Placement of the Router10/100/1000 4-Port VPN Router Figure C-3 Wall-Mounting the Router Wall-Mounting the RouterFigure C-4 Wall-Mounting Hardware Appendix D Battery Replacement Replacing a Lithium BatteryThis section instructs the user on battery replacement Appendix E Upgrading Firmware Figure E-1 Upgrade FirmwareAppendix F Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Appendix G Glossary 10/100/1000 4-Port VPN Router 10/100/1000 4-Port VPN Router 10/100/1000 4-Port VPN Router 10/100/100 Gigabit Ports, 1 10/100 RJ-45 Internet Port Appendix H SpecificationsStandards Ieee 802.3, 802.3u Ports SFP PortLimited Warranty Appendix I Warranty InformationFCC Statement Appendix J Regulatory InformationLinksys Appendix K Contact InformationNeed to contact Linksys? Information section in this Guide