Linksys RV0041 manual Log Tab System Log, Syslog, Mail, Log Setting

Page 61

10/100/1000 4-Port VPN Router

Log Tab - System Log

The System Log screen allows to configure the Router’s log, keeping track of the Router’s performance.

Syslog

Enable Syslog: Checking this box enables the Logging feature, called Syslog.

Syslog Server: In addition to the standard event log, the Router can send a detailed log to an external Syslog server. Syslog is an industry-standard protocol used to capture information about network activity. The Router’s Syslog captures all log activity and includes every connection source and destination IP address, IP service, and number of bytes transferred. Enter the Syslog server name or IP address in the Syslog Server field. Click the Save Settings button and then restart the Router for the change to take effect.

E-mail

Enable E-Mail Alert: Checking this box enables E-Mail Alert, which are emailed log entries and alerts.

Mail Server: If you wish to have any log or alert information E-mailed to you, then you must enter the name or numerical IP address of your SMTP server. Your Internet Service Provider can provide you with this information.

Send E-mail To: This is the E-mail address where the log files will be sent.

Log Queue Length (entries): This instructs the Router how often to email log entries by quantity of entries. When the number of queues is reached (i.e. the queue length), the log is sent. The default length is 50 entries.

Log Time Threshold (minutes): This instructs the Router how frequently to email log entries by amount of time. When the time threshold is reached, the log is sent. The default time is 10 minutes.

E-mail Log Now: Clicking the E-mail Log Now button immediately sends the log to the address in the Send E-mail to field.

Log Setting

Alert Log

You can receive alert logs for any of these events when you check its box on the screen: Syn Flooding, IP Spoofing, Win Nuke, Ping of Death and Unauthorized Login Attempt.

Chapter 5: Setting Up and Configuring the Router

Figure 5-49: Log tab - System Log

53

Log Tab - System Log

Image 61

Contents 10/100/1000 4-Port Word definition Copyright and TrademarksTable of Contents Appendix C Physical Setup of the Router Appendix a TroubleshootingAppendix D Battery Replacement Setting up the Router10/100/1000 4-Port VPN Router Computer-to-VPN Router VPN VPN Router-to-VPN Router VPN24 System Management Tab DNS Name Lookup 54 Basic Setup Wizard Host and Domain Name Welcome IntroductionIP a protocol used to send data over a network Adapter a device that adds network functionality to your PC What’s in this Guide?Introduction What’s in this Guide? An Introduction to LANs Networking BasicsUse of IP Addresses MAC Address Spoofing Why do I need a VPN?There are two basic ways to create a VPN connection What is a VPN?VPN Router-to-VPN Router VPN VPN Router to VPN RouterSFP Getting to Know the RouterButton on your PC to reboot it Reset Button Reset button can be used in one of two waysForwarding or a new password Proceed to Connecting the RouterOverview Connecting the RouterVPN Router Connection Instructions Setting Up and Configuring the RouterSetup Tab Setting Up and Configuring the RouterSystem Summary Tab System Management Tab Dhcp TabPort Management Tab VPN Tab Firewall TabLog Tab Wizard TabConfiguration How to Access the Web-based UtilitySystem Summary Tab System InformationFirewall Setting Status Network Setting StatusPort Statistics Log Setting Status VPN Setting StatusWAN Interface Setting LAN SettingNetwork WAN Connection TypePPPoE Point-to-Point Protocol over Ethernet most DSL users Static IPPptp Point-to-Point Tunneling Protocol Setup Tab Time Setup Tab PasswordTime Setup Tab Forwarding Setup Tab DMZ HostPort Range Forwarding Select the Service from the pull-down menu, shown in FigurePort Triggering Setup Tab One-to-One NAT Setup Tab UPnPSetup Tab Ddns Setup Tab MAC CloneDynamic Routing Setup Tab Advanced RoutingEnter the following data to create a static route entry Static RoutingSetup Dhcp Tab SetupDynamic IP Static IPSystem Management Tab Snmp Dhcp Tab StatusDNS Name Lookup System Management Tab DiagnosticPing Lookup tool may be used to find the IP addressSystem Management Tab Firmware Upgrade System Management Tab Factory DefaultFirmware Upgrade Firmware DownloadImport Configuration File System Management Tab Setting BackupExport Configuration File System Management Tab RestartBasic Per Port Config Port Management Tab Port Setup32 Port Management Tab Port Status Port Management Tab Port Status33 Firewall Tab General Firewall Tab General34 Firewall Tab Access Rules Firewall Tab Access RulesServices Add a New Access RuleScheduling Editing an Access Rule Firewall Tab Content FilterForbidden Domains SchedulingSummary VPN Tab SummaryTunnel Status 37 VPN Tab Summary Detail GroupVPN StatusVPN Tab Gateway to Gateway Local Group Setup40 VPN tab Gateway to Gateway Remote Group Setup Remote Group SetupManual IPSec SetupIKE with Preshared Key automatic 10/100/1000 4-Port VPN Router 42 VPN tab Gateway to Gateway Advanced AdvancedVPN Tab Client to Gateway With Tunnel Enabled45 VPN tab Client to Gateway Remote Group Setup With Group VPN enabled 46 VPN tab Client to Gateway IPSec Setup IKE with Preshared Key automatic 47 VPN tab Client to Gateway Advanced Tunnel mode, it will also be limited as Aggressive ModeCompress Support IP Payload compression Protocol IP Comp VPN Tab VPN Pass ThroughLog Tab System Log Log SettingSyslog Mail51 Log tab System Statistics Log Tab System StatisticsWizard Tab Basic Setup55 Basic Setup Wizard Selecting WAN Connection Types 57 Access Rule Wizard What is Access Rules Access Rule Setup59 Access Rule Wizard Select the Service 61 Access Rule Wizard Select the Destination Logout Tab Support TabOn Line Manual Linksys Web SiteCommon Problems and Solutions Appendix a TroubleshootingFor Windows 98 and Millennium Need to set a static IP address on a PCFor Windows XP For WindowsFor Windows 98 and Millennium 10/100/1000 4-Port VPN Router Need to set up a server behind my Router Am not able to access the Router’s Web-based Utility SetupWeb server 80 to Both 192.168.1.100 FTP server 21 to Application Start and End Protocol IP Address Enable500 to Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Click the DMZ Host tabNeed to upgrade the firmware To start over, I need to set the Router to factory defaultFor Microsoft Internet Explorer 5.0 or higher For Netscape 4.7 or higherMy DSL service’s PPPoE is always disconnecting Firmware upgrade failedNeed to use port triggering Where is the Router installed on the network? Frequently Asked QuestionsRouter will support up to 253 IP addresses Is IPSec Passthrough supported by the Router?How can I block corrupted FTP downloads? Router allows Pptp packets to pass through What is DMZ Hosting?Is the Router cross-platform compatible? Which modems are compatible with the Router? How many ports can be simultaneously forwarded?How can I check whether I have static or Dhcp IP addresses? Ask your ISP to find outWindows 2000 or XP Instructions Windows 98 or Me InstructionsFigure B-3 MAC Address/Physical Address For the Router’s Web-based UtilitySetting up the Router Appendix C Physical Setup of the RouterPlacement of the Router Rack-Mounting the Router10/100/1000 4-Port VPN Router Figure C-3 Wall-Mounting the Router Wall-Mounting the RouterFigure C-4 Wall-Mounting Hardware Replacing a Lithium Battery Appendix D Battery ReplacementThis section instructs the user on battery replacement Appendix E Upgrading Firmware Figure E-1 Upgrade FirmwareShared Resources Appendix F Windows HelpNetwork Neighborhood/My Network Places Appendix G Glossary 10/100/1000 4-Port VPN Router 10/100/1000 4-Port VPN Router 10/100/1000 4-Port VPN Router Standards Ieee 802.3, 802.3u Ports Appendix H SpecificationsSFP Port 10/100/100 Gigabit Ports, 1 10/100 RJ-45 Internet PortLimited Warranty Appendix I Warranty InformationFCC Statement Appendix J Regulatory InformationNeed to contact Linksys? Appendix K Contact InformationInformation section in this Guide Linksys