Linksys WRT54GR manual Wireless-G Broadband Router with RangeBooster

Page 45

Wireless-G Broadband Router with RangeBooster

For Windows 2000:

1.Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections.

2.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

3.In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Select Use the following IP address option.

4.Enter a unique IP address that is not used by any other computer on the network connected to the Router.

5.Enter the Subnet Mask, 255.255.255.0.

6.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

7.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

8.Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.

9.Restart the computer if asked.

For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000.

1.Click Start and Control Panel.

2.Click the Network and Internet Connections icon and then the Network Connections icon.

3.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

4.In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the Properties button.

5.Enter a unique IP address that is not used by any other computer on the network connected to the Router.

6.Enter the Subnet Mask, 255.255.255.0.

7.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

8.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

9.Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window.

3.I want to test my Internet connection. A Check your TCP/IP settings.

For Windows 98SE, Me, 2000, and XP:

Refer to Windows Help for details. Make sure Obtain IP address automatically is selected in the settings.

Appendix A: Troubleshooting

39

Common Problems and Solutions

Image 45
Contents Wireless- G How to Use This User Guide Copyright and TrademarksWord definition Table of Contents Appendix B Wireless Security Appendix a TroubleshootingCommon Problems and Solutions Frequently Asked Questions Appendix C Upgrading Firmware Appendix D Windows HelpRouter’s Back Panel List of Figures27 Wireless Tab Wireless MAC Filter Welcome IntroductionWhat’s in this User Guide? Wireless-G Broadband Router with RangeBooster Ad-Hoc versus Infrastructure Mode Planning Your Wireless NetworkSsid service set identifier your wireless network’s name Network TopologyPlanning Your Wireless Network Network Layout Network devices Back PanelRouter’s LEDs are located on the front panel Front PanelConnecting the Wireless-G Broadband Router with RangeBooster Connecting Your Network Devices Overview Password ScreenInternet Setup Setup Tab Basic SetupPPPoE Connection Type Router IP Time Setting DDNS.com Setup Tab Ddns16 Setup Tab MAC Address Clone Setup Tab MAC Address Clone17 Setup Tab Advanced Routing Setup Tab Advanced RoutingChanges to cancel your changes Wireless Tab Basic Wireless Settings20 Wireless Tab Wireless Security WEP Wireless Tab Wireless Security22 Wireless Tab Wireless Security PSK2 Radius Wireless MAC Filter Wireless Tab Wireless MAC FilterAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-G Broadband Router with RangeBooster Firewall Security Tab FirewallInternet Filter Web FiltersAccess Restrictions Tab Internet Access Policy Internet Access PolicySecurity Tab VPN Passthrough 33 Internet Policy Summary To create an Internet Access policySingle Port Forwarding Applications and Gaming Tab Single Port Forwarding36 Applications and Gaming Tab Port Range Forward Applications and Gaming Tab Port Range ForwardingApplications & Gaming Tab Port Range Triggering Applications and Gaming Tab DMZPort Triggering Range Management Administration Tab ManagementBackup and Restore Log Administration Tab Log42 Administration Tab Diagnostics Administration Tab DiagnosticsAdministration Tab Firmware Upgrade Administration Tab Factory DefaultsStatus Tab Router Router InformationInternet Connection Status Tab Local Network Status Tab Wireless NetworkAppendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a PC Wireless-G Broadband Router with RangeBooster Open a command prompt. For Windows 98SE and Me TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Wireless-G Broadband Router with RangeBooster Need to upgrade the firmware To start over, I need to set the Router to factory defaultFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED keeps flashing Where is my SecureEasySetup button? Frequently Asked QuestionsWhere is the Router installed on the network? Is IPSec Pass-Through supported by the Router?Does the Router support ICQ send file? What is Network Address Translation and what is it used for?How can I block corrupted FTP downloads? What are the advanced features of the Router? What is DMZ Hosting?What is the Ieee 802.11g standard? Is the Router cross-platform compatible?What Ieee 802.11g features are supported? What is the Ieee 802.11b standard?What Ieee 802.11b features are supported? What is ad-hoc mode?What is ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is a MAC Address? What is WEP?How do I reset the Router? How do I resolve issues with signal loss?Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Broadband Router with RangeBooster Appendix C Upgrading Firmware Figure C-1 Upgrade FirmwareAppendix D Windows Help Shared ResourcesNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions Windows 98SE or Me InstructionsFigure E-4 MAC Address Filter List For the Router’s Web-based UtilityAppendix D Glossary Wireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Appendix G Specifications ModelStandards Storage Temp Operating HumidityStorage Humidity Limited Warranty Appendix H Warranty InformationFCC Statement Appendix G Regulatory InformationWireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Wireless-G Broadband Router with RangeBooster Appendix J Contact Information