Linksys BEPSR31 PC-cillin Settings, Exempt Computers, Or Disable, AOL Parental Controls, Help

Page 34

Instant Broadband™ Series

Enforce ZoneAlarm Pro Security Check this box to enable ZoneAlarm Pro on the Router. This will require every PC to have ZoneAlarm Pro installed before being allowed to access the Internet (except for exempt computers).

Enforcement Level This sets how often ZoneAlarm Pro will check for unauthorized intrusions. More Secure (default setting) enables ZoneAlarm Pro to check frequently. Conserve Bandwidth enables ZoneAlarm Pro to check less frequently; this uses less bandwidth. It is recommended to set the Enforcement Level at the More Secure setting unless there is a decrease in the Router’s performance.

PC-cillin Settings

If you have downloaded PC-cillin, complete this section.

Enforce PC-cillinAnti-VirusCheck this box to enable PC-cillin Anti- Virus on the Router.

Exempt Computers

If you wish to exempt any computers from enforcement of ZoneAlarm Pro and/or PC-cillin, complete this section.

Enable/Disable To enable or disable computer exemptions, click Enable

or Disable.

From IP Address/To IP Address Enter the range of IP addresses for the computers you want to exempt from enforcement of ZoneAlarm Pro and/or PC-cillin.

AOL Parental Controls

Enabling this engages AOL’s proprietary “Parental Control” feature. Enabling this will disable all options under the Advanced tab except MAC Address cloning.

Note: AOL Parental Controls are available to AOL customers in the Unites States Only.

To apply any of the settings you change on a page, click the Apply button. To cancel any values you’ve entered on any page, click the Cancel button.

EtherFast® Cable/DSL Routers

Help

Figure 9-14

Under the Help tab, shown in Figure 9-14, you’ll find links to all of the Utility’s internal support documentation, including the application that upgrades the Router’s firmware.

New firmware versions are posted at www.linksys.com and can be downloaded for free. If the Router can access the Internet already, there’s no need to down- load a newer firmware version, unless that version has a new feature that you want to use. Loading new firmware onto the Router does not enhance the speed or the quality of your connection speed.

See the “IP Filtering” section for directions on how to enable remote firmware upgrades.

60

61

Image 34

Contents Cable/DSL Routers Copyright & Trademarks Table of Contents Introduction FeaturesLinksys EtherFastCable/DSLRouterRouter PackageContentsforforthethe11--PortRouterBEFSR11 Package Contents for the 4-Port Router BEFSR41Minimum Requirements An Introduction to LANs and WANs Package Contents for the 3-Port Router BEFSRU31IP Addresses Network Setup Overview Dhcp Dynamic Host Configuration Protocol ServersDynamic IP Addresses 4-Port Router’s Rear Panel 4-Port Router’s Front Panel LEDsProceed to Connect the Router Buttons & SwitchesReset Button 1-Port Router’s Rear PanelPort Crossover SwitchWAN Indicators 1-Port Router’s Front Panel LEDs3-Port Router’s Rear Panel USB Compatibility3-Port Router’s Front Panel LEDs Full/ColConnect the Router Connecting Your Hardware Together and Booting UpOverview Router’s hardware installation is now complete Uplinking Connecting More Devices to the RouterInstalling the BEFSRU31’s USB Port Drivers Installing the Windows 98 DriverInstant Broadband Series Installing the Windows 2000 Driver Instant Broadband Series Installing the Windows Millennium Driver Installing the Windows XP Driver Configure the PCs Configuring Windows 95, 98, and Millennium PCs Go to Configure the RouterConfiguring Windows 2000 PCs Configuring Windows XP PCs Configure the Router Advanced Proxies. Click Direct Connection to the InternetStatic IP Address or Specify an IP Address Dhcp or Obtain an IP Address AutomaticallyPPPoE Enter the Gateway AddressQuick and Easy Router Administration Cable/DSL Router’s Web-based UtilitySetup DhcpPPPoE Pptp Password StatusDhcp Security ZoneAlarm Pro SettingsLog Software DownloadExempt Computers PC-cillin SettingsOr Disable AOL Parental ControlsIP Filtering Setting Up FiltersEditing MAC Filter Setting AdvancedPort Range Forwarding UPnP Forwarding Port Triggering Dynamic Routing Static RoutingDMZ Host MAC Address Clone Appendix a TroubleshootingCommon Problems and Solutions Need to set a static IP address on a PCWant to test my Internet connection For Windows NTFor Windows XP For Windows 95, 98, and MeFor Windows XP Am not able to access the Router’s web interface Setup Need to set up a server behind my RouterCan’t get the Internet game, server, or application to work Firmware upgrade failed, and/or the Diag LED is flashing To start over, I need to set the Router to factory defaultNeed to upgrade the firmware My DSL service’s PPPoE is always disconnectingDiag LED stays lit continuously Click the Advanced = Filter tabNeed to use port triggering Full/Col LED keeps flickering continuouslyFrequently Asked Questions Allows Pptp packets to pass through Appendix B Glossary Instant Broadband Series Instant Broadband Series Instant Broadband Series 101 103 Appendix C How to Ping Your ISP’s E-mail & Web Addresses Step One Pinging an IP Address Step Two Pinging for a Web AddressAppendix D Installing the TCP/IP Protocol TCP/IP installation is now completeCrimping Your Own Network Cables Appendix E Twisted-Pair CablingStraight-Through Cabling Figure F-1 For Windows NT, 2000, and XPFigure F-5 Http//192.168.1.1 in the web AOL Broadband via CableObtain an IP automat- ically from Port Environmental Specifications Appendix H 4-Port Router SpecificationsFour 10/100 RJ-45 switched ports and shared AOL Broadband via DSLPort Router Specifications Appendix I 1-Port Router SpecificationsAppendix J 3-Port Router Specifications Three 10/100 RJ-45 Switched ports and sharedAppendix L Contact Information Appendix K Warranty InformationSales Information Technical Support RMA Issues Fax Web site FTP siteCopyright 2002 Linksys, All Rights Reserved