Linksys BEPSR41, BEPSR31, BEPSR11 manual Frequently Asked Questions

Page 48

Instant Broadband™ Series

Frequently Asked Questions

What is the maximum number of IP addresses that the Router will support? The

Router will support up to 253 IP addresses.

Is IPSec Pass-Through supported by the Router? Yes, it is a built-in feature that

the Router automatically enables.

Where is the Router installed on the network? In a typical environment, the Router is installed between the cable/DSL modem and the LAN. Plug the Router into the cable/DSL modem’s Ethernet port.

Does the Router support IPX or AppleTalk? No. TCP/IP is the only protocol stan- dard for the Internet and has become the global standard for communications. IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but those protocols cannot connect from WAN to LAN.

Does the WAN connection of the Router support 100 Mbps Ethernet? Because of the speed limitations of broadband Internet connections, the Router’s current hardware design supports 10 Mbps Ethernet on its WAN port. It does, of course, support 100 Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for? Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many private addresses behind this single address provided by the ISP.

Does the Router support any operating system other than Windows 95, Windows 98, Windows 2000, Windows NT, or Windows XP? Yes, but Linksys does not, at

this time, provide technical support for setup, configuration or troubleshoot- ing of any non-Windows operating systems.

EtherFast® Cable/DSL Routers

Does the Router support ICQ send file? Yes, with the following fix: click ICQ menu -> preference -> connections tab->, and check I am behind a fire- wall or proxy. Then set the firewall time-out to 80 seconds in the firewall set- ting. The Internet user can then send a file to a user behind the Router.

I set up an Unreal Tournament Server, but others on the LAN cannot join. What do

I need to do? If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. You can also use a port forwarding range of 7777 ~ 27900. If you want to use the UT Server Admin, forward another port (8080 usually works well but is used for remote admin. You may have to disable this.), and then in the [UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and ServerName to the IP assigned to the Router from your ISP.

Can multiple gamers on the LAN get on one game server and play simultaneously

with just one public IP address? It depends on which network game or what kind of game server you are using. For example, Unreal Tournament supports multi-login with one public IP.

How do I get Half-Life: Team Fortress to work with the Router? The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x” added to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the same server. One problem: Version 1.0.1.6 won’t let multiple computers with the same CD key connect at the same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does not need to be in the DMZ. Just forward port 27015 to the local IP address of the server computer.

How can I block corrupted FTP downloads? If you are experiencing corrupted files when you download a file with your FTP client, try using another FTP program.

The web page hangs; downloads are corrupt, or nothing but junk characters are

being displayed on the screen. What do I need to do? Force your Ethernet adapter to 10Mbps or half duplex mode, and turn off the “Auto-negotiate” feature of your Ethernet adapter as a temporary measure. (Please look at the Network Control Panel in your Ethernet adapter’s Advanced Properties tab.) Make sure that your proxy setting is disabled in the browser. Check our web- site at www.linksys.com for more information.

88

89

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Cable/DSL Routers Copyright & Trademarks Table of Contents Features IntroductionLinksys EtherFastCable/DSLRouterRouter Package Contents for the 4-Port Router BEFSR41 PackageContentsforforthethe11--PortRouterBEFSR11Minimum Requirements Package Contents for the 3-Port Router BEFSRU31 An Introduction to LANs and WANsIP Addresses Dhcp Dynamic Host Configuration Protocol Servers Network Setup OverviewDynamic IP Addresses 4-Port Router’s Rear Panel 4-Port Router’s Front Panel LEDsButtons & Switches Reset ButtonProceed to Connect the Router 1-Port Router’s Rear PanelCrossover Switch WAN IndicatorsPort 1-Port Router’s Front Panel LEDs3-Port Router’s Rear Panel USB Compatibility3-Port Router’s Front Panel LEDs Full/ColConnecting Your Hardware Together and Booting Up Connect the RouterOverview Router’s hardware installation is now complete Uplinking Connecting More Devices to the RouterInstalling the BEFSRU31’s USB Port Drivers Installing the Windows 98 DriverInstant Broadband Series Installing the Windows 2000 Driver Instant Broadband Series Installing the Windows Millennium Driver Installing the Windows XP Driver Configure the PCs Configuring Windows 95, 98, and Millennium PCs Go to Configure the RouterConfiguring Windows 2000 PCs Configuring Windows XP PCs Configure the Router Advanced Proxies. Click Direct Connection to the InternetDhcp or Obtain an IP Address Automatically PPPoEStatic IP Address or Specify an IP Address Enter the Gateway AddressQuick and Easy Router Administration Cable/DSL Router’s Web-based UtilitySetup DhcpPPPoE Pptp Password StatusDhcp ZoneAlarm Pro Settings LogSecurity Software DownloadPC-cillin Settings Or DisableExempt Computers AOL Parental ControlsSetting Up Filters Editing MAC Filter SettingIP Filtering AdvancedPort Range Forwarding UPnP Forwarding Port Triggering Dynamic Routing Static RoutingDMZ Host Appendix a Troubleshooting Common Problems and SolutionsMAC Address Clone Need to set a static IP address on a PCFor Windows NT For Windows XPWant to test my Internet connection For Windows 95, 98, and MeFor Windows XP Am not able to access the Router’s web interface Setup Need to set up a server behind my RouterCan’t get the Internet game, server, or application to work To start over, I need to set the Router to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Diag LED is flashing My DSL service’s PPPoE is always disconnectingClick the Advanced = Filter tab Need to use port triggeringDiag LED stays lit continuously Full/Col LED keeps flickering continuouslyFrequently Asked Questions Allows Pptp packets to pass through Appendix B Glossary Instant Broadband Series Instant Broadband Series Instant Broadband Series 101 103 Appendix C How to Ping Your ISP’s E-mail & Web Addresses Step One Pinging an IP Address Step Two Pinging for a Web AddressAppendix D Installing the TCP/IP Protocol TCP/IP installation is now completeAppendix E Twisted-Pair Cabling Crimping Your Own Network CablesStraight-Through Cabling Figure F-1 For Windows NT, 2000, and XPFigure F-5 AOL Broadband via Cable Http//192.168.1.1 in the webObtain an IP automat- ically from Appendix H 4-Port Router Specifications Four 10/100 RJ-45 switched ports and sharedPort Environmental Specifications AOL Broadband via DSLAppendix I 1-Port Router Specifications Appendix J 3-Port Router SpecificationsPort Router Specifications Three 10/100 RJ-45 Switched ports and sharedAppendix K Warranty Information Sales Information Technical Support RMA Issues FaxAppendix L Contact Information Web site FTP siteCopyright 2002 Linksys, All Rights Reserved

BEPSR31, BEPSR11, BEPSR41 specifications

The Linksys BEPSR series, which includes the BEPSR41, BEPSR11, and BEPSR31 models, is renowned for its commitment to providing robust, reliable networking solutions for both home and small office environments. Each model in this line features distinctive characteristics that suit different needs while maintaining the core performance that Linksys is known for.

The Linksys BEPSR41 is a four-port broadband router that stands out for its exceptional speed and stability. With support for ADSL and cable connections, this model is equipped with advanced features such as Network Address Translation (NAT) and a built-in firewall for enhanced security. The BEPSR41 utilizes wired Ethernet technology, providing reliable connections and lag-free access to the internet. Its four LAN ports enable connections to multiple devices, making it an ideal choice for households with numerous connected devices.

Moving on to the Linksys BEPSR11, this model is a more compact solution, designed for users with simpler networking needs. The BEPSR11 features a one-port configuration, making it perfect for individual users or small setups that require minimal device connectivity. Despite its smaller size, it offers solid performance with similar NAT and firewall capabilities as its larger counterpart. This model is an excellent choice for users who value simplicity and efficient internet connectivity without the complexities of advanced networking setups.

Lastly, the Linksys BEPSR31 combines features from both previous models, offering an ideal balance between performance and usability. It provides two LAN ports, making it suitable for small offices or homes where a couple of wired connections are needed. The setup process is straightforward, allowing users to get online quickly with minimal configuration. The BEPSR31 also supports basic QoS (Quality of Service) features, allowing users to prioritize traffic for smoother streaming and gaming experiences.

All three models emphasize ease of use, security, and dependable performance, catering to different user requirements. Their solid design, combined with Linksys’s reputation for quality and reliability in home networking, makes the BEPSR41, BEPSR11, and BEPSR31 excellent options for anyone looking to enhance their internet experience without extensive technical knowledge. Whether for gaming, streaming, or everyday browsing, these routers provide essential features that meet modern connectivity demands.
Top Page Image Contents