Wireless-G Media Storage Link Router with SpeedBooster
7.Connect the AC power adapter to the Router's Power port and the other end into an electrical outlet. Only use the power adapter supplied with the Router. Use of a different adapter may result in product damage.
Figure 4-4: Connect the Power
Proceed to the following section, “Placement Options.”
Placement Options
There are three ways to place the Router. The first way is to place it horizontally on a surface, so it sits on its four rubber feet. The second way is to stand the Router vertically on a surface (this uses its
Stand Option
If you place the Gateway flat on a surface, then you can leave the stand in the closed position. However, if you want the Gateway to be upright, swivel the stand clockwise 90º and position the Gateway accordingly.
Now that the hardware installation is complete, proceed to “Chapter 5: Configuring the
Media Storage Link Router,” for directions on how to configure the Router.
Wall-Mount Option
The Router has four
Before you begin, make sure you have two screws that are size
1. Determine where you want to mount the Router.
Chapter 4: Connecting the Wireless-G Media Storage Link Router
IMPORTANT: Make sure you use the power adapter that is supplied with the Router. Use of a different power adapter could damage the Router.
Figure 4-5: Stand in Closed Position
10
Placement Options