![](/images/new-backgrounds/1266526/26652657x1.webp)
Wireless-G Media Storage Link Router with SpeedBooster
The Wireless Tab - Basic Wireless Settings
The basic settings for wireless networking are set on this screen.
Wireless Network
Wireless Network Mode. From this
Wireless Network Name (SSID). The SSID is the network name shared among all devices in a wireless network.
The SSID must be identical for all devices in the wireless network. It is
characters (use any of the characters on the keyboard). Make sure this setting is the same for all devices in your Figure
Wireless Channel. Select the appropriate channel from the list provided to correspond with your network settings. All devices in your wireless network must be broadcast on the same channel in order to function correctly.
Wireless SSID Broadcast. When wireless clients survey the local area for wireless networks to associate with, they will detect the SSID broadcast by the Router. To broadcast the Router's SSID, keep the default setting, Enable. If you do not want to broadcast the Router's SSID, then select Disable.
SecureEasySetup Button. The status of the Router’s SecureEasySetup feature is displayed here. If you want to use the Router’s SecureEasySetup feature, click the SecureEasySetup button.
NOTE: SecureEasySetup uses WPA Personal encryption. If your current wireless devices do not support WPA Personal security, then you cannot use SecureEasySetup on your network. You will need to manually configure your network security using the encryption supported by your existing devices.
You will be asked to press the SecureEasySetup button (hardware or software) on your wireless client (computer or other network device) within two minutes to complete the SecureEasySetup process. Click the OK button to continue.
Chapter 6: Configuring the | 22 |
The Wireless Tab - Basic Wireless Settings