Linksys WRTSL54GS Where is my SecureEasySetup button?, Does the Router support IPX or AppleTalk?

Page 67

Wireless-G Media Storage Link Router with SpeedBooster

Where is my SecureEasySetup button?

On the Router, the SecureEasySetup button is located on the front panel. The button should be lighted either orange or white. For other SecureEasySetup devices, refer to each wireless device's documentation to locate the button on that device.

I have devices that support WPA-Personal security, but do not have SecureEasySetup. Can I still use

SecureEasySetup?

Yes. Print out the wireless security settings at the end of the SecureEasySetup process, and then manually configure the settings for your non-SecureEasySetup devices. Refer to each wireless device’s documentation for instructions on how to enter these settings.

What is the maximum number of IP addresses that the Router will support?

The Router will support up to 253 IP addresses.

Is IPSec Pass-Through supported by the Router?

Yes, it is a built-in feature that the Router automatically enables.

Where is the Router installed on the network?

In a typical environment, the Router is installed between the cable/DSL modem and the LAN. Plug the Router into the cable/DSL modem’s Ethernet port.

Does the Router support IPX or AppleTalk?

No. TCP/IP is the only protocol standard for the Internet and has become the global standard for communications. IPX, a NetWare communications protocol used only to route messages from one node to another, and AppleTalk, a communications protocol used on Apple and Macintosh networks, can be used for LAN to LAN connections, but those protocols cannot connect from the Internet to a LAN.

Does the Internet connection of the Router support 100Mbps Ethernet?

The Router’s current hardware design supports up to 100Mbps Ethernet on its Internet port; however, the Internet connection speed will vary depending on the speed of your broadband connection. The Router also supports 100Mbps over the auto-sensing Fast Ethernet 10/100 switch on the LAN side of the Router.

What is Network Address Translation and what is it used for?

Network Address Translation (NAT) translates multiple IP addresses on the private LAN to one public address that is sent out to the Internet. This adds a level of security since the address of a PC connected to the private LAN is never transmitted on the Internet. Furthermore, NAT allows the Router to be used with low cost Internet accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many private addresses behind this single address provided by the ISP.

Appendix A: Troubleshooting

60

Frequently Asked Questions

Image 67
Contents 802 GHz .11g Wireless- G Copyright and Trademarks How to Use This User GuideWord definition Table of Contents Appendix C Upgrading Firmware Appendix D Windows Help Appendix a TroubleshootingAppendix B Wireless Security Common Problems and Solutions Frequently Asked QuestionsRouter’s Back Panel List of Figures25 Wireless Tab Wireless Security Radius 58 The Traceroute Test Welcome IntroductionWhat’s in this User Guide? Wireless-G Media Storage Link Router with SpeedBooster Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Ssid service set identifier your wireless network’s namePlanning Your Wireless Network Network Layout Back Panel Getting to Know the Wireless-G Media Storage Link RouterDMZ Front PanelInstructions for Connecting the Router Connecting the Wireless-G Media Storage Link RouterConnect Your Network Devices Stand Option Placement OptionsWall-Mount Option Wall-Mount Slots Overview Configuring the Wireless-G Media Storage Link RouterInternet Setup Setup Tab Basic SetupInternet Connection Type PPPoE Connection Type L2TP Connection Type Router IP Network SetupOptional Settings Network Address Server Settings Dhcp12 Time Setting Time SettingDynDNS.org Setup Tab DdnsTZO.com MAC Clone Setup Tab MAC Address CloneDynamic Routing Setup Tab Advanced RoutingOperating Mode Advanced Routing18 Routing Table Entry List Wireless Network Wireless Tab Basic Wireless Settings20 SecureEasySetup Ready Screen Wireless Security Wireless Tab Wireless SecurityEncryption encoding data transmitted in a network 24 Wireless Tab Wireless Security WPA2 Enterprise 25 Wireless Tab Wireless Security Radius Wireless MAC Filter Wireless Tab Wireless MAC FilterAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-G Media Storage Link Router with SpeedBooster Firewall Security Tab FirewallBlock WAN Requests VPN Passthrough Security Tab VPN PassthroughErase Disk Storage Tab DiskDisk Management Disk DetailCreate Share Storage Tab ShareShare Management SharesGroup Management Storage Tab AdministrationBasic User Management40 Modify Group Properties Database SetupStorage Tab Media Server UPnP Media ServerInternet Access Access Restrictions Tab Internet AccessTo create a policy 46 List of PCs Port Range Forward Applications and Gaming Tab Port Range ForwardPort Range Forwarded Range Applications & Gaming Tab Port TriggeringPort Triggering Triggered RangeDMZ Applications and Gaming Tab DMZEthernet Port Priority Wired QoSApplications and Gaming Tab QoS Device PriorityWireless QoS Router Password Administration Tab ManagementUPnP Log Administration Tab LogPing Parameters Administration Tab DiagnosticsPing Test Traceroute TestAdministration Tab Firmware Upgrade Administration Tab Factory DefaultsAdministration Tab Config Management Internet Configuration TypeStatus Tab Router Router InformationLocal Network Status Tab Local NetworkWireless Status Tab WirelessCommon Problems and Solutions Appendix a TroubleshootingNeed to set a static IP address on a PC Wireless-G Media Storage Link Router with SpeedBooster Open a command prompt. For Windows 98SE and Me TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Wireless-G Media Storage Link Router with SpeedBooster My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Power LED is flashingPower LED keeps flashing Do not see the Router in my Network Neighborhood Frequently Asked QuestionsHow do I set up additional devices using SecureEasySetup? Cannot write to the USB disk attached to the RouterDoes the Router support IPX or AppleTalk? Where is my SecureEasySetup button?Where is the Router installed on the network? Is IPSec Pass-Through supported by the Router?How can I block corrupted FTP downloads? Does the Router support ICQ send file?Router allows Pptp packets to pass through What is DMZ Hosting?What Ieee 802.11g features are supported? What are the advanced features of the Router?What is the Ieee 802.11g standard? What is the Ieee 802.11b standard?What is roaming? What Ieee 802.11b features are supported?What is ad-hoc mode? What is infrastructure mode?What is WEP? What is ISM band?What is Spread Spectrum? What is DSSS? What is FHSS? And what are their differences?Have excellent signal strength, but I cannot see my network How do I resolve issues with signal loss?Security Precautions Appendix B Wireless SecuritySecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Media Storage Link Router with SpeedBooster Appendix C Upgrading Firmware Shared Resources Appendix D Windows HelpNetwork Neighborhood/My Network Places Windows 2000 or XP Instructions Windows 98SE or Me InstructionsFigure E-4 MAC Address Filter List For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Appendix G Specifications Storage Humidity Limited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationWireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Dual-Band Wireless Access Point Need to contact Linksys? Appendix J Contact InformationInformation section in this Guide

WRTSL54GS specifications

The Linksys WRTSL54GS is a versatile wireless router that has earned a reputation for its robust performance and user-friendly features. A member of the renowned WRT family, it combines a powerful 802.11g wireless capability with a wired Ethernet connection, making it ideal for home and small office environments.

One of the primary features of the WRTSL54GS is its ability to serve as a wireless access point and a router simultaneously. It supports a maximum data transfer rate of up to 54 Mbps, allowing users to enjoy fast internet connectivity. The router operates on the 2.4GHz frequency band, which is suited for routine web browsing, streaming, and online gaming.

The WRTSL54GS supports advanced security features that help protect users' data and privacy. With WPA2 encryption, users can ensure that their wireless networks are secure from unauthorized access. The inclusion of a built-in firewall further enhances network security, making it harder for potential threats to infiltrate the system.

Another standout feature of the WRTSL54GS is its USB port, which allows for the connection of external storage devices. This capability enables file sharing among networked computers, making it convenient to access documents, photos, and multimedia content from multiple devices. Additionally, the USB support can facilitate print sharing, allowing users to connect a printer directly to the router.

Employing Quality of Service (QoS) technology, the WRTSL54GS can prioritize bandwidth for specific applications or devices. This ensures that high-demand activities, such as video streaming or online gaming, receive adequate bandwidth to function smoothly, enhancing the overall user experience.

Installation and configuration are straightforward thanks to the user-friendly web-based interface. Users can easily set up wireless security protocols, manage connected devices, and adjust settings to suit their preferences.

In summary, the Linksys WRTSL54GS combines reliable wireless capabilities, robust security features, and practical functionalities like USB support, making it a compelling choice for anyone looking to enhance their home or small office network. Its ease of use and scalability ensure that it remains a relevant solution even as network demands evolve. Overall, it provides a solid balance of performance and versatility.