Linksys WRTSL54GS manual Wireless-G Media Storage Link Router with SpeedBooster

Page 59

Wireless-G Media Storage Link Router with SpeedBooster

•For Windows 2000:

1.Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections.

2.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

3.In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button. Select Use the following IP address option.

4.Enter a unique IP address that is not used by any other computer on the network connected to the Router.

5.Enter the Subnet Mask, 255.255.255.0.

6.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

7.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

8.Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.

9.Restart the computer if asked.

•For Windows XP:

The following instructions assume you are running Windows XP with the default interface. If you are using the Classic interface (where the icons and menus look like previous Windows versions), please follow the instructions for Windows 2000.

1.Click Start and Control Panel.

2.Click the Network and Internet Connections icon and then the Network Connections icon.

3.Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option.

4.In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the Properties button.

5.Enter a unique IP address that is not used by any other computer on the network connected to the Router.

6.Enter the Subnet Mask, 255.255.255.0.

7.Enter the Default Gateway, 192.168.1.1 (Router’s default IP address).

8.Toward the bottom of the window, select Use the following DNS server addresses, and enter the Preferred DNS server and Alternative DNS server (provided by your ISP). Contact your ISP or go on its website to find the information.

9.Click the OK button in the Internet Protocol (TCP/IP) Properties window. Click the OK button in the Local Area Connection Properties window.

3.I want to test my Internet connection. A Check your TCP/IP settings.

For Windows 98SE, Me, 2000, and XP:

•Refer to Windows Help for details. Make sure Obtain IP address automatically is selected in the settings.

Appendix A: Troubleshooting

52

Common Problems and Solutions

Page 58 Page 60
Image 59
Page 58 Page 60
Contents 802 GHz .11g Wireless- G Word definition How to Use This User GuideCopyright and Trademarks Table of Contents Appendix C Upgrading Firmware Appendix D Windows Help Appendix a TroubleshootingAppendix B Wireless Security Common Problems and Solutions Frequently Asked QuestionsRouter’s Back Panel List of Figures25 Wireless Tab Wireless Security Radius 58 The Traceroute Test Welcome IntroductionWhat’s in this User Guide? Wireless-G Media Storage Link Router with SpeedBooster Network Topology Planning Your Wireless NetworkAd-Hoc versus Infrastructure Mode Ssid service set identifier your wireless network’s namePlanning Your Wireless Network Network Layout Back Panel Getting to Know the Wireless-G Media Storage Link RouterDMZ Front PanelInstructions for Connecting the Router Connecting the Wireless-G Media Storage Link RouterConnect Your Network Devices Wall-Mount Option Placement OptionsStand Option Wall-Mount Slots Overview Configuring the Wireless-G Media Storage Link RouterInternet Connection Type Setup Tab Basic SetupInternet Setup PPPoE Connection Type L2TP Connection Type Router IP Network SetupOptional Settings Network Address Server Settings Dhcp12 Time Setting Time SettingTZO.com Setup Tab DdnsDynDNS.org MAC Clone Setup Tab MAC Address CloneDynamic Routing Setup Tab Advanced RoutingOperating Mode Advanced Routing18 Routing Table Entry List Wireless Network Wireless Tab Basic Wireless Settings20 SecureEasySetup Ready Screen Encryption encoding data transmitted in a network Wireless Tab Wireless SecurityWireless Security 24 Wireless Tab Wireless Security WPA2 Enterprise 25 Wireless Tab Wireless Security Radius Wireless MAC Filter Wireless Tab Wireless MAC FilterAdvanced Wireless Wireless Tab Advanced Wireless SettingsWireless-G Media Storage Link Router with SpeedBooster Block WAN Requests Security Tab FirewallFirewall VPN Passthrough Security Tab VPN PassthroughErase Disk Storage Tab DiskDisk Management Disk DetailCreate Share Storage Tab ShareShare Management SharesGroup Management Storage Tab AdministrationBasic User Management40 Modify Group Properties Database SetupStorage Tab Media Server UPnP Media ServerTo create a policy Access Restrictions Tab Internet AccessInternet Access 46 List of PCs Port Range Applications and Gaming Tab Port Range ForwardPort Range Forward Forwarded Range Applications & Gaming Tab Port TriggeringPort Triggering Triggered RangeDMZ Applications and Gaming Tab DMZEthernet Port Priority Wired QoSApplications and Gaming Tab QoS Device PriorityWireless QoS UPnP Administration Tab ManagementRouter Password Log Administration Tab LogPing Parameters Administration Tab DiagnosticsPing Test Traceroute TestAdministration Tab Config Management Administration Tab Factory DefaultsAdministration Tab Firmware Upgrade Internet Configuration TypeStatus Tab Router Router InformationLocal Network Status Tab Local NetworkWireless Status Tab WirelessNeed to set a static IP address on a PC Appendix a TroubleshootingCommon Problems and Solutions Wireless-G Media Storage Link Router with SpeedBooster Open a command prompt. For Windows 98SE and Me TCP Application Start and End Protocol IP Address EnabledCan’t get the Internet game, server, or application to work Wireless-G Media Storage Link Router with SpeedBooster My DSL service’s PPPoE is always disconnecting To start over, I need to set the Router to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Power LED is flashingPower LED keeps flashing Do not see the Router in my Network Neighborhood Frequently Asked QuestionsHow do I set up additional devices using SecureEasySetup? Cannot write to the USB disk attached to the RouterDoes the Router support IPX or AppleTalk? Where is my SecureEasySetup button?Where is the Router installed on the network? Is IPSec Pass-Through supported by the Router?How can I block corrupted FTP downloads? Does the Router support ICQ send file?Router allows Pptp packets to pass through What is DMZ Hosting?What Ieee 802.11g features are supported? What are the advanced features of the Router?What is the Ieee 802.11g standard? What is the Ieee 802.11b standard?What is roaming? What Ieee 802.11b features are supported?What is ad-hoc mode? What is infrastructure mode?What is WEP? What is ISM band?What is Spread Spectrum? What is DSSS? What is FHSS? And what are their differences?Have excellent signal strength, but I cannot see my network How do I resolve issues with signal loss?Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G Media Storage Link Router with SpeedBooster Appendix C Upgrading Firmware Network Neighborhood/My Network Places Appendix D Windows HelpShared Resources Windows 2000 or XP Instructions Windows 98SE or Me InstructionsFigure E-4 MAC Address Filter List For the Router’s Web-based UtilityAppendix F Glossary Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Appendix G Specifications Storage Humidity Limited Warranty Appendix H Warranty InformationFCC Statement Appendix I Regulatory InformationWireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Wireless-G Media Storage Link Router with SpeedBooster Dual-Band Wireless Access Point Information section in this Guide Appendix J Contact InformationNeed to contact Linksys?

WRTSL54GS specifications

The Linksys WRTSL54GS is a versatile wireless router that has earned a reputation for its robust performance and user-friendly features. A member of the renowned WRT family, it combines a powerful 802.11g wireless capability with a wired Ethernet connection, making it ideal for home and small office environments.

One of the primary features of the WRTSL54GS is its ability to serve as a wireless access point and a router simultaneously. It supports a maximum data transfer rate of up to 54 Mbps, allowing users to enjoy fast internet connectivity. The router operates on the 2.4GHz frequency band, which is suited for routine web browsing, streaming, and online gaming.

The WRTSL54GS supports advanced security features that help protect users' data and privacy. With WPA2 encryption, users can ensure that their wireless networks are secure from unauthorized access. The inclusion of a built-in firewall further enhances network security, making it harder for potential threats to infiltrate the system.

Another standout feature of the WRTSL54GS is its USB port, which allows for the connection of external storage devices. This capability enables file sharing among networked computers, making it convenient to access documents, photos, and multimedia content from multiple devices. Additionally, the USB support can facilitate print sharing, allowing users to connect a printer directly to the router.

Employing Quality of Service (QoS) technology, the WRTSL54GS can prioritize bandwidth for specific applications or devices. This ensures that high-demand activities, such as video streaming or online gaming, receive adequate bandwidth to function smoothly, enhancing the overall user experience.

Installation and configuration are straightforward thanks to the user-friendly web-based interface. Users can easily set up wireless security protocols, manage connected devices, and adjust settings to suit their preferences.

In summary, the Linksys WRTSL54GS combines reliable wireless capabilities, robust security features, and practical functionalities like USB support, making it a compelling choice for anyone looking to enhance their home or small office network. Its ease of use and scalability ensure that it remains a relevant solution even as network demands evolve. Overall, it provides a solid balance of performance and versatility.
Top Page Image Contents