Linksys BEFSR11, BEFSR41 manual Reset Button, One-Port Router’s Front Panel LEDs

EtherFast Cable/DSL Routers

Buttons & Switches			Note: If you aren’t
			sure whether to
The Reset Button	Information on the		choose crossover
			or straight-through
	Reset button can be		on the crossover
	found on page 5.	switch, a good indicator is to
		check the Link LED on the front
The Crossover Switch	The Crossover	of the Router. If the Link light is
		not illuminated after the router is
	Switch ( II X )	fully installed and configured, try
	toggles the LAN	switching the crossover switch
	port between	over to the other option. If the
		Link LED illuminates then, you
	crossover mode (X)
		have made the correct choice.
	and straight-through
	mode (II). If you are connecting the Router directly
	to a computer or to an Uplink port, choose
	crossover (X). For anything else, choose straight-
	through (II).

The One-Port Router’s Front Panel LEDs

The LAN Indicators

Power	Green. The Power LED illuminates when the Router is pow-
	ered on.
Link/Act	Green. The Link/Act LED serves two purposes. If the LED
	is continuously illuminated, the Router is successfully con-
	nected to a device through the LAN port. If the LED is
	flickering, the Router is actively sending or receiving data
	over the LAN port.

7