Instant Broadband Series
The 4-Port Router’s Front Panel LEDs
The LAN Indicators
Power | Green. The Power LED illuminates when the Router is pow- |
| ered on. |
Link/Act | Green. The Link/Act LED serves two purposes. If the LED |
| is continuously illuminated, the Router is successfully con- |
| nected to a device through the corresponding port (1, 2, 3 |
| or 4). If the LED is flickering, the Router is actively send- |
| ing or receiving data over that port. |
Full/Col | Green. The Full/Col LED also serves two purposes. If this |
| LED is continuously illuminated, the connection made |
| through the corresponding port is successfully running in |
| Full Duplex mode. If the LED is flickering, the connection |
| is experiencing collisions. Infrequent collisions are normal. |
| If this LED is flickering too often, there may be a problem |
| with your connection. Check the Troubleshooting section on |
| page 30 if you think there is a problem. |
100 or 10/100 | Orange. The 100 LED illuminates when a successful |
| 100Mbps connection is made through the corresponding |
| port. |
4