Linksys BEFSR11, BEFSR41 manual With the Router and requires no special settings

Page 36

EtherFast Cable/DSL Routers

How do I get Napster to work with the Router? Napster is fully compatible

with the Router and requires no special settings.

I setup an Unreal Tournament Server, but others on the LAN cannot join. What do I need to do? If you have a dedicated Unreal Tournament server running, you need to create a static IP for each of the LAN computers and forward ports 7777, 7778, 7779, 7780, 7781, and 27900 to the IP address of the server. If you want to use the UT Server Admin, forward another port (8080 usually works well), then in the [UWeb.WebServer] section of the server.ini file, set the ListenPort to 8080 (to match the mapped port above) and ServerName to the IP assigned to the router from your ISP.

Can multiple gamers on the LAN get on one game server and play simultaneous- ly with just one public IP address? It depends on the which network game or what kind of game server you are using. For example, Unreal Tournament supports multi-login with one public IP.

How do I get Half-Life: Team Fortress to Work with the Router? The default client port for Half-Life is 27005. The computers on your LAN need to have "+clientport 2700x" to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the same server. One problem: version 1.0.1.6 won't let multiple computers with the same CD key connect at the same time, even if on the same LAN (not a problem with 1.0.1.3). As far as hosting games, the HL server does not need to be in the DMZ. Just forward port 27015 to the local IP of the server computer. There remains, however, a problem with people being booted after a few minutes with an "illegible server message."

How can I not receive corrupted FTP downloads? If you are experiencing cor- rupted files when you download a file with your FTP client, try using another FTP program.

Web page hangs, corrupt downloads, or nothing but junk characters are being displayed on the screen. What do I need to do? Force your NIC to 10Mbps or half duplex mode, and turn off the "Autonegotiate" feature of your NIC as a temporary measure. (Please look at the Network Control Panel, in your Ethernet Adapter's Advanced Properties tab.). Check our website at www.linksys.com for more information.

33

Image 36
Contents EtherFast Copyright & Trademarks Table of Contents Features IntroductionLinksys EtherFast Cable/DSL Router Package Contents System RequirementsGetting to Know the 4-Port EtherFast Cable/DSL Router 4-Port Router’s Rear Panel4-Port Router’s Front Panel LEDs Link/ActReset Button Getting to Know the One-Port EtherFast Cable/DSL Router One-Port Router’s Rear PanelReset Button One-Port Router’s Front Panel LEDs10/100 Connecting the Cable/DSL Router to Your Network OverviewAbout Static & Dynamic IP Addresses Connecting Everything Together & Booting Up Power everything downPower on the Cable or DSL modem Configuring Your Network with EtherFast Cable/DSL Routers Click Apply, then click Continue Configuring Your PCs to Connect to the Cable/DSL Router Instant Broadband Series Quick & Easy Administration Cable/DSL Router’s Web- based UtilitySetup EtherFast Cable/DSL Routers Password Status Dhcp Help To Modify Filter Settings FiltersForwarding Dynamic Routing Static Routing Instant Broadband Series DMZ Host Troubleshooting Common Problems and SolutionsWhen I enter a URL or IP address, I get a time out error Frequently Asked Questions With the Router and requires no special settings NAT and TCP/IP port inspections Tion of your public IPs and Domain How to Ping Your ISP’s E-mail & Web Addresses AppendixStep Two Pinging for a Web Address Instant Broadband Series Installing the TCP/IP Protocol TCP/IP Installation is complete Twisted-Pair Cabling Crimping Your Own Network Cables Port Router Specifications EnvironmentalOne-Port Router Specifications Customer Support Copyright 2000 Linksys, All Rights Reserved