Linksys BEFSR11, BEFSR41 manual When I enter a URL or IP address, I get a time out error

Page 34

EtherFast Cable/DSL Routers

should be the Router’s IP Address, and DNS (in "More".)

•Same as above, check the same setup values in the Status Monitor page of the Cable/DSL Router.

4.When I enter a URL or IP address, I get a time out error.

•Check if other PCs work. If they do, ensure that your workstations IP settings are correct (IP address, Subnet Mask, Default gateway and DNS)

•If the PCs are configured correctly, but still not working, check the Cable/DSL Router. Ensure that it is connected and ON. Connect to it and check its settings. (If you cannot connect to it, check the LAN and power connections.)

•If the Cable/DSL Router is configured correctly, check your Internet connection. (DSL/Cable modem etc.) to see that it is working correctly.

5.I can’t obtain an IP address from my cable or DSL modem.

•Ensure that all of your cabling is properly connected and that all of the router’s WAN and LAN LEDs are correctly illuminated.

•Power down your cable or DSL modem for a few seconds. Turn it back on. After the modem goes through its self-test, check to see if you now have an IP address.

•Ensure that your cable or DSL modem is DHCP-capable.

•You may have to enter the router or host name in the Setup page of the Router’s web-based utility. Go to page 18 for more information.

•Your ISP may require Mac Addresses. Check with your ISP. This address can be obtained in the Status screen of the Router’s Web-based Utility.

31

Page 33 Page 35
Image 34
Page 33 Page 35
Contents EtherFast Copyright & Trademarks Table of Contents Introduction FeaturesLinksys EtherFast Cable/DSL Router Package Contents System RequirementsGetting to Know the 4-Port EtherFast Cable/DSL Router 4-Port Router’s Rear Panel4-Port Router’s Front Panel LEDs Link/ActReset Button Getting to Know the One-Port EtherFast Cable/DSL Router One-Port Router’s Rear PanelReset Button One-Port Router’s Front Panel LEDs10/100 Overview Connecting the Cable/DSL Router to Your NetworkAbout Static & Dynamic IP Addresses Connecting Everything Together & Booting Up Power everything downPower on the Cable or DSL modem Configuring Your Network with EtherFast Cable/DSL Routers Click Apply, then click Continue Configuring Your PCs to Connect to the Cable/DSL Router Instant Broadband Series Quick & Easy Administration Cable/DSL Router’s Web- based UtilitySetup EtherFast Cable/DSL Routers Password Status Dhcp Help To Modify Filter Settings FiltersForwarding Dynamic Routing Static Routing Instant Broadband Series DMZ Host Troubleshooting Common Problems and SolutionsWhen I enter a URL or IP address, I get a time out error Frequently Asked Questions With the Router and requires no special settings NAT and TCP/IP port inspections Tion of your public IPs and Domain How to Ping Your ISP’s E-mail & Web Addresses AppendixStep Two Pinging for a Web Address Instant Broadband Series Installing the TCP/IP Protocol TCP/IP Installation is complete Twisted-Pair Cabling Crimping Your Own Network Cables Port Router Specifications EnvironmentalOne-Port Router Specifications Customer Support Copyright 2000 Linksys, All Rights Reserved
Top Page Image Contents