Linksys BEFSR11, BEFSR41 manual Configuring Your Network with

Page 15

	Instant Broadband Series
	Configuring Your Network with
	the Cable/DSL Router
	the Cable/DSL Router	Note: If the TCP/IP
		protocol is not config-
	Configuring the Cable/DSL Router	ured on your PC, go
	Configuring the Cable/DSL Router	to page 39 of the
		Appendix for TCP/IP
	Now that your Cable/DSL Router is wired into your net-	installation instruc-
	Now that your Cable/DSL Router is wired into your net-	tions now.
	work, you can begin configuring your system.
	work, you can begin configuring your system.

1.Open your web browser and type http://192.168.1.1 in the browser’s Address box. This number is the default IP address of your router. Press Enter.

2.A username and password prompt will appear. Leave the User Name box empty and type admin (the default password) in the Password box. Click OK.

Note: If you have previously enabled an Internet Sharing Proxy Service on any of your PCs, you must disable it now.

•If you are running Netscape Navigator: Click Edit >> Preference >> Advanced >> Proxies> and click Direct Connection to the Internet.

•If you are running Internet Explorer v5 or better, click Start>> Settings>> Control Panel>> Internet Options>> Connections>> LAN Settings. Remove the check on the proxy setting. Click OK to continue.

12

Image 15

Contents EtherFast Copyright & Trademarks Table of Contents Features IntroductionLinksys EtherFast Cable/DSL Router System Requirements Package Contents4-Port Router’s Rear Panel Getting to Know the 4-Port EtherFast Cable/DSL RouterLink/Act 4-Port Router’s Front Panel LEDsReset Button One-Port Router’s Rear Panel Getting to Know the One-Port EtherFast Cable/DSL RouterOne-Port Router’s Front Panel LEDs Reset Button10/100 Connecting the Cable/DSL Router to Your Network OverviewAbout Static & Dynamic IP Addresses Power everything down Connecting Everything Together & Booting UpPower on the Cable or DSL modem Configuring Your Network with EtherFast Cable/DSL Routers Click Apply, then click Continue Configuring Your PCs to Connect to the Cable/DSL Router Instant Broadband Series Cable/DSL Router’s Web- based Utility Quick & Easy AdministrationSetup EtherFast Cable/DSL Routers Password Status Dhcp Help Filters To Modify Filter SettingsForwarding Dynamic Routing Static Routing Instant Broadband Series DMZ Host Common Problems and Solutions TroubleshootingWhen I enter a URL or IP address, I get a time out error Frequently Asked Questions With the Router and requires no special settings NAT and TCP/IP port inspections Tion of your public IPs and Domain Appendix How to Ping Your ISP’s E-mail & Web AddressesStep Two Pinging for a Web Address Instant Broadband Series Installing the TCP/IP Protocol TCP/IP Installation is complete Twisted-Pair Cabling Crimping Your Own Network Cables Environmental Port Router SpecificationsOne-Port Router Specifications Customer Support Copyright 2000 Linksys, All Rights Reserved