NETGEAR DM602 manual Connecting the Modem, Access Requirement

Reference Manual for the Model DM602 ADSL Modem

Access Requirement

The Model DM602 ADSL Modem contains a built-in ADSL modem, which connects directly to an ADSL service provider.

Connecting the Modem

Before using your modem, you need to do the following:

•Connect your Ethernet or USB cable from the computer to the modem (see page 2-8).

•Connect the line from your ADSL service provider to the ADSL port of the modem (see page 2-5).

•Connect the power adapter (see page 2-7).

A typical installation is shown in Figure 2-4, below

Line

DSL Phone

DM602 ADSL Modem

Figure 2-4. Typical installation

Connecting to Your ADSL Service and Telephone Provider

The ADSL and telephone connections may vary by region.

Setting Up the Hardware 2-5