NETGEAR DM602 manual LAN IP Setup Menu

		Reference Manual for the Model DM602 ADSL Modem
Table 5-4.	Modem Statistics Fields (continued)
Field		Description
TxPkts		The number of packets transmitted on this port since reset or manual clear.
RxPkts		The number of packets received on this port since reset or manual clear.
Poll Interval		Specifies the intervals at which the statistics are updated in this window. Click on Stop
		to freeze the display.

LAN IP Setup

The LAN IP Setup menu allows configuration of LAN IP services such as DHCP. From the Main Menu of the browser interface, under Advanced, click on LAN IP Setup to view the LAN IP Setup menu, shown in Figure 5-6

Figure 5-6. LAN IP Setup Menu

The modem is shipped preconfigured to use private IP addresses on the LAN side, and to act as a DHCP server. The modem’s default LAN IP configuration is:

•LAN IP addresses—192.168.0.1

•Subnet mask—255.255.255.0

These addresses are part of the IETF-designated private address range for use in private networks, and should be suitable in most applications. If your network has a requirement to use a different IP addressing scheme, you can make those changes in this menu.

Note: If you change the LAN IP address of the modem while connected through the browser, you will be disconnected. You must then open a new connection to the new IP address and log in again.

Advanced Configuration of the Modem 5-7