NETGEAR DM602 manual This screen shows the following parameters

Reference Manual for the Model DM602 ADSL Modem

This screen shows the following parameters:

Table 5-1.	Router Status Fields
Field		Description
Firmware Version		This field displays the modem firmware version.
LAN Port		These IP parameters apply to the Local Area Network (LAN) of the
		modem.
MAC Address		This field displays the Ethernet MAC address being used by the LAN
		port of the modem.
IP Address		This field displays the IP address being used by the ADSL (WAN) port of
		the modem. If no address is shown, the modem cannot connect to the
		Internet.
IP Subnet Mask		This field displays the IP Subnet Mask being used by the ADSL(WAN)
		port of the modem.
Modem		These parameters apply to the ADSL modem section of the modem.
ADSL Firmware Version		This field displays the ADSL chipset firmware version.
Modem Status		This field displays the state of the ADSL connection to your service
		provider, either “Connecting” or “Connected”
Connect Mode		This field displays the protocol used to connect to your service provider.
		When the ADSL link comes up, the connection will be either “Fast” or
		“Interleaved”, depending on the way the telephone company has
		configured its equipment
Down Stream		This field displays the connection rate from the service provider to the
		modem in bits per second
Up Stream		This field displays the connection rate from the modem to the service
		provider in bits per second
VPI		This field displays the VPI entered in the Setup Wizard or Basic Settings
		screen
VCI		This field displays the VCI entered in the Setup Wizard or Basic Settings
		screen

5-2 Advanced Configuration of the Modem