NETGEAR DM602 manual Trademarks

Page 2

© 2002 by NETGEAR, Inc. All rights reserved.

Trademarks

NETGEAR is a trademark of Netgear, Inc.

Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation.

Other brand and product names are registered trademarks or trademarks of their respective holders.

Statement of Conditions

In the interest of improving internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes to the products described in this document without notice.

NETGEAR does not assume any liability that may occur due to the use or application of the product(s) or circuit layout(s) described herein.

Federal Communications Commission (FCC) Compliance Notice: Radio Frequency Notice

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

EN 55 022 Declaration of Conformance

This is to certify that the Model DM602 ADSL Modem is shielded against the generation of radio interference in accordance with the application of Council Directive 89/336/EEC, Article 4a. Conformity is declared by the application of EN 55 022 Class B (CISPR 22).

ii

Image 2
Contents Reference Manual for the Model DM602 Adsl Modem Trademarks Customer Support Page Contents Chapter Preparing Your Computer Appendix a Technical Specifications Viii Contents About This Guide Technical Support Related PublicationsTypographical Conventions Special Message FormatsAbout the Modem Key FeaturesChapter Introduction Auto UplinkTM and Autosensing 10/100 Ethernet Modem or Router Device ModeModem Device Mode Router Device Mode Easy Installation and ManagementMaintenance and Support Reference Manual for the Model DM602 Adsl Modem Chapter Setting Up the Hardware Package ContentsModel DM602 Resource CD, including Modem’s Front Panel LED DescriptionsPC Requirements Modem’s Rear PanelLocal Network Hardware Requirements Connecting to Your Adsl Service and Telephone Provider Connecting the ModemAccess Requirement Adsl Through a Modular RJ-11 Wall Jack Adsl Through Other Wall JacksConnecting the Power Adapter Verifying PowerConnecting to Your Computer EthernetCD Startup Screen Ready to Configure Your Modem Chapter Preparing Your Computer Preparing Your Computer for TCP/IP NetworkingConfiguring Windows 95, 98, and ME for TCP/IP Networking Install or Verify Windows Networking ComponentsReference Manual for the Model DM602 Adsl Modem Enabling Dhcp to Automatically Configure TCP/IP Settings Selecting Windows’ Internet Access MethodConfiguring Windows NT or 2000 for TCP/IP Networking Verifying TCP/IP Properties WindowsVerifying TCP/IP Properties Configuring a Macintosh for TCP/IP NetworkingConfiguring MacOS 8.6 or 9.x for TCP/IP Networking Configuring MacOS X for TCP/IP Networking Verifying TCP/IP Properties for Macintosh Computers Verifying the Readiness of Your DSL Internet Account Are Login Protocols Used?Is Your ISP Configuration for a Static IP Address? Ready for Configuration Restarting the ComputerChapter Basic Configuration of the Modem Accessing the Web Configuration Manager in the ModemBrowser-based Configuration via Basic Router Settings menu Menu for PPP login accounts Reference Manual for the Model DM602 Adsl Modem Login window opens as shown in -4below Completing the Configuration Modem Device Mode Basic Settings windowAdvanced Configuration of the Modem Router Device Mode StatusThis screen shows the following parameters This screen shows the following statistics PPP Status screen Modem Device Mode Status Modem Status screenModem Statistics Fields LAN IP Setup LAN IP Setup MenuChanging the Modem Access Password Firmware UpgradeDMZ Device Mode DMZ menu10. Device Mode menu Reference Manual for the Model DM602 Adsl Modem PWR LED Not On Chapter TroubleshootingBasic Functioning Troubleshooting the Modem’s Web Configuration Interface WAN LED Green or Blinking Green Troubleshooting the ISP ConnectionAdsl link WAN LED Blinking YellowTroubleshooting PPPoE or PPPoA Obtaining a WAN IP AddressUsing the Default Reset button Restoring the Default Configuration and PasswordTroubleshooting Internet Browsing Reference Manual for the Model DM602 Adsl Modem Appendix a Technical Specifications General SpecificationsLAN Glossary See Asymmetric Digital Subscriber LineIPX ISP Public Switched Telephone Network See Windows Internet Naming Service Index AdslIndex
Related manuals
Manual 66 pages 42.16 Kb