NETGEAR DM602 manual Chapter Preparing Your Computer

Chapter 3

Preparing Your Computer

Preparing Your Computer for TCP/IP Networking	3-1
Configuring Windows 95, 98, and ME for TCP/IP Networking	3-2
Install or Verify Windows Networking Components	3-2
Enabling DHCP to Automatically Configure TCP/IP Settings	3-4
Selecting Windows’ Internet Access Method	3-4
Verifying TCP/IP Properties (Windows)	3-5
Configuring Windows NT or 2000 for TCP/IP Networking	3-5
Install or Verify Windows Networking Components	3-5
Verifying TCP/IP Properties	3-6
Configuring A Macintosh for TCP/IP Networking	3-6
Configuring MacOS 8.6 or 9.x for TCP/IP Networking	3-6
Configuring MacOS X for TCP/IP Networking	3-7
Verifying TCP/IP Properties for Macintosh Computers	3-8
Verifying the Readiness of Your DSL Internet Account	3-9
Are Login Protocols Used?	3-9
Is Your ISP Configuration for a Static IP Address?	3-9
Restarting the Computer	3-10
Ready for Configuration	3-10
Chapter 4
Basic Configuration of the Modem
Accessing the Web Configuration Manager in the Modem	4-1
Configuring the Modem in Router Device Mode
for an ISP Account with PPPoE or PPPoA Login	4-3
Configuring the Modem in Modem Device Mode
for a Fixed (Static) TCP/IP Account	4-4
Completing the Configuration	4-6
Chapter 5
Advanced Configuration of the Modem
Router Device Mode Status	5-1
Modem Device Mode Status	5-5
LAN IP Setup	5-7
Changing the Modem Access Password	5-8
Firmware Upgrade	5-8
DMZ	5-9
vi	Contents