NETGEAR DG834GUV5 user manual Configuring WEP

Page 30

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual

Configuring WEP

To configure WEP data encryption:

1.Log in to the modem router at its default LAN address of http://10.0.0.2 with its default user name of admin, and default password of admin, or using whatever user name, password, and LAN address you have chosen for the modem router.

2.From the main menu, select Wireless Settings to display the Wireless Settings screen.

3.In the Security Options section, select the WEP (Wired Equivalent Privacy) radio button:

Figure 2-3

4.Select the Authentication Type: Automatic, Open System, or Shared Key. The default is Open System.

Note: The authentication scheme is separate from the data encryption. You can select an authentication scheme that requires a shared key but still leaves the data transmissions unencrypted. If you require strong security, use both the Shared Key and WEP encryption settings.

5.Select the Encryption Strength setting:

WEP (Wired Equivalent Privacy) 64-bit encryption. Enter 10 hexadecimal digits (any combination of 0–9,a–f, or A–F).

WEP (Wired Equivalent Privacy) 128-bit encryption. Enter 26 hexadecimal digits (any combination of 0–9,a–f, or A–F).

6.Enter the encryption keys. You can manually or automatically program the four data encryption keys. These values must be identical on all computers and Access Points in your network:

2-8

Configuring Your Wireless Network and Security Settings

v1.0, May 2009

Image 30
Contents NETGEAR, Inc FCC Statement TrademarksStatement of Conditions European Union Statement of Compliance Bestätigung des Herstellers/Importeurs 1999/5/EGCertificate of the Manufacturer/Importer Voluntary Control Council for Interference Vcci StatementCustomer Support V1.0, May Contents Chapter Protecting Your Network Chapter Configuring Telkom VPN Lite V1.0, May About This Manual Conventions, Formats, and ScopePrinting a page in the Html view How to Use This ManualHow to Print this Manual Printing a chapterPrinting the full manual Xiv Chapter Configuring Your Internet Connection What You Need Before You BeginUsing the Installation CD to Set Up Your Router Logging In to the Modem RouterViewing or Manually Configuring Your ISP Settings ISP does not require login Basic Settings Fields Description Settings DescriptionGet Automatically from ISP. Your ISP uses Dhcp to Changing Your Adsl Settings Want to useHow the Internet Connection Works Chapter Configuring Your Wireless Network Security Settings Planning Your Wireless NetworkWireless Placement and Range Guidelines See Manually Configuring Your Wireless Network onWireless Security Options Manually Configuring Your Wireless Network V1.0, May Wireless Settings SsidConfiguring Your Wireless Security Wireless SecurityConfiguring WEP Configuring WPA, WPA2, or WPA/WPA2 Using Push N Connect WPS to Configure Your Wireless Network Using a WPS Button to Add a WPS Client Using PIN Entry to Add a WPS Client V1.0, May V1.0, May Advanced Wireless Settings for WPS and WDS Controlling Wireless Station Access Turning off wireless connectivity completelyHiding your wireless network name Ssid Restricting Access by MAC Address V1.0, May Protecting Access to Your ADSL2+ Modem Wireless Router Changing the Built-In PasswordChapter Protecting Your Network Configuring Basic Firewall Services Changing the Administrator Login Time-outBlocking Keywords, Sites, and Services Blocking Keywords and SitesKeyword Result Firewall Rules Inbound Rules Port Forwarding Inbound Rule Example a Local Public Web ServerInbound Rule Example Allowing Videoconferencing Outbound Rules Service Blocking Considerations for Inbound RulesOutbound Rule Example Blocking Instant Messenger V1.0, May Services Order of Precedence for RulesSetting Times and Scheduling Firewall Services V1.0, May Scheduling Firewall Services V1.0, May Backing Up, Restoring, or Erasing Your Settings Backing Up the Configuration to a FileChapter Managing Your Network Restoring the Configuration from a File Erasing the ConfigurationUpgrading the Modem Router Firmware V1.0, May Network Management Information Viewing Modem Router Status and Usage StatisticsModem Router Status Fields DNS Viewing Statistics Viewing Connection Status Router Statistics FieldsViewing Attached Devices Connection Status Fields for PPPoAViewing, Selecting, and Saving Logged Information Security Log Entry DescriptionsSelecting Which Information to Log Saving Log Files on a ServerLog Action Buttons Activation and Administration Log Message ExamplesDropped Packets Enabling Security Event E-mail Notification Send alerts and logs via emailRunning Diagnostic Utilities and Rebooting the Modem Router Configuring Remote Management Enabling Remote ManagementSelect the Turn Remote Management On check box Http//134.177.0.1238080 Chapter Advanced Configuration Modifying Your WAN SetupWAN Setup Settings Setting DescriptionSetting Up a Default DMZ Server Configuring Your LAN IP Settings LAN IP Setup LAN TCP/IPUsing the Modem Router as a Dhcp Server Use Router as Dhcp ServerDefining Reserved IP Addresses Click Edit or DeleteConfiguring Dynamic DNS Using Static Routes Select the Use a Dynamic DNS Service check boxStatic Route Example Configuring Static Routes Configuring Universal Plug and Play UPnP V1.0, May Configuring Wireless Bridging and Repeating WDS Point-to-Point Bridge Configuration Multi-Point Bridge Configuration V1.0, May Repeater with Wireless Client Association V1.0, May Chapter Configuring Telkom VPN Lite What is VPN Lite?Configuring VPN Lite V1.0, May V1.0, May V1.0, May Chapter Troubleshooting Basic FunctioningPower LED Is Red Troubleshooting Access to the Modem Router Main MenuPower LED Is Not On LAN or DSL or Internet Port LEDs Are Not OnTroubleshooting the ISP Connection Adsl LinkDSL LED Is Solid Green DSL LED Is BlinkingDSL LED Is Off Obtaining a WAN IP Address Troubleshooting PPPoE or PPPoA Troubleshooting Internet BrowsingClick Connection Status Troubleshooting a TCP/IP Network Using the Ping Utility Testing the LAN Path to Your RouterRestoring the Default Configuration and Password Testing the Path from Your Computer to a Remote DeviceProblems with Date and Time V1.0, May Chapter Connecting a USB Drive to the Router File Sharing ScenariosSharing Photos with Friends and Family Sharing photos with friends and familyStoring Files in a Central Location for Playing or Printing Storing files in a central location for printingUnderstanding the USB Configuration Settings Sharing Large Files with ColleaguesNetwork Access FTP AccessConnecting a USB Drive to the DG834GUv5 Attached DeviceUSB Drive Requirements Select the folder to share Using the USB Drive Menu to Grant FTP Access Rights Granting Users Access to the USB DriveGranting an account access to the USB Device Unmounting a USB Drive\\10.0.0.2 Understanding the USB Drive Access MethodsConnecting to the USB Drive from a Local Web Browser \\10.0.0.2\share\partition1Connecting to the USB Drive from a Remote Computer Accessing the Router’s USB Drive Remotely Using FTPLocating the Internet Port IP Address Configuring Windows 2000 and Windows XP Connecting to the USB Drive From Your Home/Office NetworkConfiguring Windows 98SE and Windows ME Enabling File and Printer SharingAccessing the USB Drive from My Network Places Accessing the USB Drive from the Windows Start MenuAccessing the USB Drive from Windows Explorer \\ipaddressAppendix a Technical Specifications Network Protocol and Standards CompatibilityV1.0, May AppendixB Related Documents Document LinkV1.0, May