NETGEAR DG834GUV5 user manual Select the Turn Remote Management On check box

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual

2.Under the Advanced heading of the main menu, select Remote Management to display the Remote Management screen:

Figure 4-10

3.Select the Turn Remote Management On check box.

4.Specify which external addresses will be allowed to access the modem router’s remote management.

For security, restrict access to as few external IP addresses as practical:

•To allow access from any IP address on the Internet, select Everyone.

•To allow access from a range of IP addresses on the Internet, select IP address range. Enter a beginning and ending IP address to define the allowed range.

•To allow access from a single IP address on the Internet, select Only This Computer. Enter the IP address that will be allowed access.

5.Specify the port number that will be used for accessing the management interface.

Web browser access normally uses the standard HTTP service port 80. For greater security, you can change the remote management Web interface to a custom port by entering that number in the field provided. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP.

6.Click Apply to have your changes take effect.

Managing Your Network 4-15

v1.0, May 2009