NETGEAR DG834GUV5 user manual Using Push N Connect WPS to Configure Your Wireless Network

Page 32

DG834GUv5 Wireless Router with Built-in DSL Modem User Manual

5.For WPA-PSK or WPA2-PSK, enter the passphrase.

6.If prompted, enter the settings for the Radius server. For WPA-802.1x or WPA2-802.1x, these settings are required for communication with the primary Radius server.

Primary Radius Server IP Address. The IP address of the Radius server. The default is 0.0.0.0

Radius Port. Port number of the Radius server. The default is 1812.

Shared Key. This is shared between the wireless access point and the Radius server during authentication.

7.To save your settings, click Apply.

Using Push 'N' Connect (WPS) to Configure Your Wireless Network

If your wireless clients support Wi-Fi Protected Setup (WPS), you can use this feature to configure the modem router’s SSID and security settings and, at the same time, connect the wireless client

securely and easily to the modem router. Look for the symbol on your client device (computers that will connect wirelessly to the modem router are clients). WPS automatically configures the network name (SSID) and wireless security settings for the modem router (if the modem router is in its default state) and broadcasts these settings to the wireless client.

Some considerations regarding WPS are:

WPS supports only WPA-PSK and WPA2-PSK wireless security. WEP security is not supported by WPS.

NETGEAR’s Push 'N' Connect feature is based on the WPS standard. All other Wi-Fi-certified and WPS-capable products should be compatible with NETGEAR products that implement Push 'N' Connect.

If your wireless network will include a combination of WPS capable devices and non-WPS capable devices, NETGEAR suggests that you set up your wireless network and security settings manually first, and use WPS only for adding additional WPS capable devices. See “Connecting Additional Wireless Client Devices After WPS Setup” on page 2-14.

A WPS client can be added using the Push Button method or the PIN method.

Using the Push Button. This is the preferred method. See the following section, “Using a WPS Button to Add a WPS Client”.

2-10

Configuring Your Wireless Network and Security Settings

v1.0, May 2009

Image 32
Contents NETGEAR, Inc Statement of Conditions FCC StatementTrademarks European Union Statement of Compliance Bestätigung des Herstellers/Importeurs 1999/5/EGCustomer Support Certificate of the Manufacturer/ImporterVoluntary Control Council for Interference Vcci Statement V1.0, May Contents Chapter Protecting Your Network Chapter Configuring Telkom VPN Lite V1.0, May About This Manual Conventions, Formats, and ScopeHow to Use This Manual How to Print this ManualPrinting a page in the Html view Printing a chapterPrinting the full manual Xiv Chapter Configuring Your Internet Connection What You Need Before You BeginUsing the Installation CD to Set Up Your Router Logging In to the Modem RouterViewing or Manually Configuring Your ISP Settings ISP does not require login Basic Settings Fields Description Settings DescriptionGet Automatically from ISP. Your ISP uses Dhcp to Changing Your Adsl Settings Want to useHow the Internet Connection Works Chapter Configuring Your Wireless Network Security Settings Planning Your Wireless NetworkWireless Placement and Range Guidelines See Manually Configuring Your Wireless Network onWireless Security Options Manually Configuring Your Wireless Network V1.0, May Wireless Settings SsidConfiguring Your Wireless Security Wireless SecurityConfiguring WEP Configuring WPA, WPA2, or WPA/WPA2 Using Push N Connect WPS to Configure Your Wireless Network Using a WPS Button to Add a WPS Client Using PIN Entry to Add a WPS Client V1.0, May V1.0, May Advanced Wireless Settings for WPS and WDS Hiding your wireless network name Ssid Controlling Wireless Station AccessTurning off wireless connectivity completely Restricting Access by MAC Address V1.0, May Chapter Protecting Your Network Protecting Access to Your ADSL2+ Modem Wireless RouterChanging the Built-In Password Configuring Basic Firewall Services Changing the Administrator Login Time-outBlocking Keywords, Sites, and Services Blocking Keywords and SitesKeyword Result Firewall Rules Inbound Rules Port Forwarding Inbound Rule Example a Local Public Web ServerInbound Rule Example Allowing Videoconferencing Outbound Rule Example Blocking Instant Messenger Outbound Rules Service BlockingConsiderations for Inbound Rules V1.0, May Services Order of Precedence for RulesSetting Times and Scheduling Firewall Services V1.0, May Scheduling Firewall Services V1.0, May Chapter Managing Your Network Backing Up, Restoring, or Erasing Your SettingsBacking Up the Configuration to a File Upgrading the Modem Router Firmware Restoring the Configuration from a FileErasing the Configuration V1.0, May Modem Router Status Fields Network Management InformationViewing Modem Router Status and Usage Statistics DNS Viewing Statistics Viewing Connection Status Router Statistics FieldsViewing Attached Devices Connection Status Fields for PPPoAViewing, Selecting, and Saving Logged Information Security Log Entry DescriptionsLog Action Buttons Selecting Which Information to LogSaving Log Files on a Server Dropped Packets Activation and AdministrationLog Message Examples Enabling Security Event E-mail Notification Send alerts and logs via emailRunning Diagnostic Utilities and Rebooting the Modem Router Configuring Remote Management Enabling Remote ManagementSelect the Turn Remote Management On check box Http//134.177.0.1238080 Chapter Advanced Configuration Modifying Your WAN SetupWAN Setup Settings Setting DescriptionSetting Up a Default DMZ Server Configuring Your LAN IP Settings LAN IP Setup LAN TCP/IPUsing the Modem Router as a Dhcp Server Use Router as Dhcp ServerDefining Reserved IP Addresses Click Edit or DeleteConfiguring Dynamic DNS Static Route Example Using Static RoutesSelect the Use a Dynamic DNS Service check box Configuring Static Routes Configuring Universal Plug and Play UPnP V1.0, May Configuring Wireless Bridging and Repeating WDS Point-to-Point Bridge Configuration Multi-Point Bridge Configuration V1.0, May Repeater with Wireless Client Association V1.0, May Configuring VPN Lite Chapter Configuring Telkom VPN LiteWhat is VPN Lite? V1.0, May V1.0, May V1.0, May Chapter Troubleshooting Basic FunctioningTroubleshooting Access to the Modem Router Main Menu Power LED Is Not OnPower LED Is Red LAN or DSL or Internet Port LEDs Are Not OnTroubleshooting the ISP Connection Adsl LinkDSL LED Is Off DSL LED Is Solid GreenDSL LED Is Blinking Obtaining a WAN IP Address Click Connection Status Troubleshooting PPPoE or PPPoATroubleshooting Internet Browsing Troubleshooting a TCP/IP Network Using the Ping Utility Testing the LAN Path to Your RouterRestoring the Default Configuration and Password Testing the Path from Your Computer to a Remote DeviceProblems with Date and Time V1.0, May Chapter Connecting a USB Drive to the Router File Sharing ScenariosSharing Photos with Friends and Family Sharing photos with friends and familyStoring Files in a Central Location for Playing or Printing Storing files in a central location for printingUnderstanding the USB Configuration Settings Sharing Large Files with ColleaguesNetwork Access FTP AccessConnecting a USB Drive to the DG834GUv5 Attached DeviceUSB Drive Requirements Select the folder to share Using the USB Drive Menu to Grant FTP Access Rights Granting Users Access to the USB DriveGranting an account access to the USB Device Unmounting a USB DriveUnderstanding the USB Drive Access Methods Connecting to the USB Drive from a Local Web Browser\\10.0.0.2 \\10.0.0.2\share\partition1Locating the Internet Port IP Address Connecting to the USB Drive from a Remote ComputerAccessing the Router’s USB Drive Remotely Using FTP Connecting to the USB Drive From Your Home/Office Network Configuring Windows 98SE and Windows MEConfiguring Windows 2000 and Windows XP Enabling File and Printer SharingAccessing the USB Drive from the Windows Start Menu Accessing the USB Drive from Windows ExplorerAccessing the USB Drive from My Network Places \\ipaddressAppendix a Technical Specifications Network Protocol and Standards CompatibilityV1.0, May AppendixB Related Documents Document LinkV1.0, May