ACTiSYS PP2-5600 user manual System Requirements, Front View, Rear View, Battery Compartment

Infrared Modem User’s Manual

System Requirements

PDA or any hardware devices with IrDA or RS232 serial interface and any of the following Operating System: Windows 95 and above, DOS, Linux, WinCE, Palm OS, PSION, Penbex and others

Front View

1.Speaker produces the sound to show the connection to the ISP or host device.

2.IR Module output the Infrared signal to search and connect to another Infrared device.

3.LED shows the status of on-line, infrared connection and power of the battery.

Rear View

1.Multi switch for selecting functions among Serial, Off and IR

2.RS-232/Power port for connecting to a PDA, PC or other device with serial port using the serial cable included in this package.

3.Phone Jack for connecting to telephone line.

4.Power Jack for connecting to the AC power supply through a 100~240VAC travel charger.

Battery Compartment

The modem could be used with four rechargeable AAA batteries or four regular disposal batteries. When use with disposal AAA battery, you could also use four batteries. There is a better efficiency when using three disposal batteries. Connecting the travel charger, the smart circuit inside the modem will automatically

2003/11 From 3JTech Revision 1.0 Page 6 of 41