Infrared Modem User’s Manual
IV. SOFTWARE INSTALLATION GUIDE
For Palm Organiser
(1)Hardware needed:
1.3JTech. Pegasus III series modem
2.Pilot 1000*. Pilot 5000*, Palm Pilot Personal*, Palm Pilot Professional*, Palm III and above (IIIe Not include), IBM Workpad series and TRGPro
3.Cable for Palm III or Cable for Palm V
(The Serial Cable synchronizes the Palm organizer and the Pegasus modem. One end of the cable is a Palm connector (see Note below); the other end is the MiniDIN 9Pin male connector that connects to Pegasus III modem. Please follow the following steps)
(2)Software needed
1.Palm Desktop 3.0.1 or above
2.Palm OS 3.3 or above**
(3)Modem Set-up:
1.Tap on "APPLICATIONS"
2.Tap on "PREFS" (Preferences).
3.Go to the top right hand corner under "Preference" page, and tap on the drop down menu.
4.Tap on "CONNECTION" in the
5.Tap on “New”.
6.Next to "Name", write IR MODEM.
7.Next to Connection Method select IrCOMM to MODEM.
2003/11 From 3JTech | Revision 1.0 | Page 9 of 41 |