Infrared Modem User’s Manual
take care of the batteries charging . Also, the main power source will be from the travel charger. In order to save power, the modem will:
1)Get into sleeping mode when no data is transmitting over the phone line for over 4 seconds, (The transition between sleeping and normal operation modes is transparent to users)
2)Automatically shut down when there is no data transmitting over the phone line for over 1Min.
When the modem is shut down, you will need to push the reset button to turn on the modem.
Notice: Do not open the battery cover. If you encounter problems with your rechargeable batteries, please contact your local dealer.
Setting Your Modem
Connect the modem to a PC through the Serial Cable
The modem could of course works with your regular PC including the desktop with a serial port:
1)Insert one end of the phone cord (included) into the Pegasus III modem’s LINE jack and plug the other end into any analogue phone jack. Important: Connect to an analogue line only. Using a
(Refer to the connection diagram page 3).
2)Insert one end of the Serial (Power combination) Cord into the serial socket located on the rear of the modem. Insert the other end of power cord into the travel charger. Plug the travel charger into a regular power wall outlet (You can also use batteries for power.) Connect the same end to your serial port of your computer. If your PC only has a 25 pin serial port, please use a 25 pin to
2003/11 From 3JTech | Revision 1.0 | Page 7 of 41 |