Airlink101 AR685W user manual Channel Number, Show Active Clients

Channel Number	6	Please select a channel from the dropdown list of
		‘Channel Number’ for broadcasting. You can choose any
		channel number you want to use, and almost all wireless
		clients can locate the channel you’re using automatically
		without any problem. However, it’s still useful to
		remember the channel number you use, some wireless
		client supports manual channel number select, and this
		would help in certain scenario when there is some radio
		communication problem.
Show Active Clients		Click “Show Active Clients” button, then an “Active
		Wireless Client Table” will pop up. You can see the

status of all active wireless clients that are connecting to the Router.

After you finish with all settings, please click “Apply” button.

If you want to reset all settings in this page, please click “Cancel” button.

After you clicked Apply, the following message will be displayed on your web browser:

You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting).

39