Airlink101 AR685W WPA Unicast Cipher Suite, Pre-shared Key Format, Radius Server IP Address

Page 42

Parameters

Description

WPA Unicast Cipher Suite

Available options are: WPA(TKIP) and WPA2(AES). Please

 

make sure your wireless client supports the cipher you selected.

Pre-shared Key Format

You may select Passphrase (alphanumeric format) or Hex (in the

 

“A-F”, “a-f” and “0-9” range) to be the Pre-shared Key.

Pre-shared Key

The Pre-shared key is used to authenticate and encrypt data

 

transmitted in the wireless network. You may create your own

 

key here for wireless clients to connect to your router.

 

 

3.2.2.3 WPA RADIUS

IEEE 802.1x is an authentication protocol. Every user must use a valid account to login to this wireless router before accessing the wireless LAN. The authentication is processed by a RADIUS server. This mode only authenticates user by IEEE 802.1x, but it does not encryption the data during communication.

Select “WPA RADIUS” for the “Encryption” mode if you wish to use WPA RADIUS to encrypt your wireless network.

Parameters

Description

WPA Unicast Cipher Suite

Please select a type of WPA cipher suite.

 

Available options are: WPA (TKIP) and WPA2 (AES). You can

 

select one of them, but you have to make sure your wireless

 

client support the cipher you selected.

RADIUS Server IP Address

Please input the IP address of your Radius authentication server

 

here.

RADIUS Server Port

Please input the port number of your Radius authentication

 

server here. Default setting is 1812.

RADIUS Server Password

Please input the password of your Radius authentication server

 

here.

 

 

43

Image 42
Contents Wireless N 300 Green Router Federal Communication Commission Interference Statement Table of Contents Troubleshooting Technical Support Features Package ContentsRouter Interface Front Panel LEDsAntenna a Antenna B Installing the Router Using EZ Setup WizardPage Page Dynamic IP Cable Modem users PPPoE DSL users Page Congratulations! Your router configuration has been finished Connecting to the Router Wirelessly Page Using Web Configuration Utility Page Setup Wizard Enable NTP UpdateCurrent Time Daylight Savings Time ZoneTime Server Address Host NamePrimary DNS Secondary DNSUser Name PasswordService Name Connection TypePptp Pptp Gateway Connection IDTelstra Big Pond L2TP GatewayAssign login server manually Server IP AddressBand Channel NumberAssociated Clients WPA2AES Page Network 1 WANSubnet Mask 2 LANIP address 802.1d Spanning TreeDhcp Client Start IP Enable Static Dhcp LeasesLease Time Dhcp Client End IPPage NAT / Static Routing Delete Delete AllDynamic DNS Password/KeyDdns ProviderWireless Basic SettingsShow Active Clients Encryption Wireless SecurityEnable 802.1x Authentication See 3.2.2.1 to 3.2.2.3 for each encryption typeDefault Tx Key Key LengthKey Format WPA Pre-share Key Encryption Key 1~4Pre-shared Key Format Radius Server PasswordWPA Unicast Cipher Suite Pre-shared KeyComment Enable MAC ControlMAC Control ClearPage Advanced Settings Preamble Type Tx PowerChannel Width Broadcast Essid5 WPS Page Configure by Push Button Enable WPSConfig Mode Configure by Client PinCodeApplication & Gaming Virtual Server Port ForwardingYou can also click ‘Reset’ button to unselect all TCP/UDP Port to Open Enable Special ApplicationsSpecial Applications Port Triggering Popular ApplicationParameter Description Add in red boxPublic IP Enable DMZ3 DMZ Client PC IP addressButton ALG Settings 5 QoS Rule Name Move UpMove Down BandwidthTraffic Type Protocol1 IP & Port Filtering Access RestrictionsEnable IP & Port Filtering Deny/AllowClient Service Client PC DescriptionPort Range Page Client PC MAC Address Enable MAC FilteringMAC Filtering Current MAC Filtering TableIf you want to delete a specific MAC address entry, check URL/Keyword Enable URL Filtering3 URL/Keyword Filtering Current URL Blocking TableSecurity FirewallDoS Denial-of-Service Ping of Death Pptp pass through VPN Pass throughIPsec pass through L2TP pass throughAdministration TimeConfirmed Password Current PasswordNew Password ManagementReset Reboot Remote Management Firmware Upgrade Restore Settings Configuration SettingsBackup Settings Restore to Factory Default6 Log SaveRefresh Statistics Status Internet Connection StatusLAN Status Wlan Wireless LAN Status System StatusTroubleshooting Technical Support