3.6.2 Management
3.6.2.1 Password
You can change the password required to log into the Router’s web configuration utility. The default user name and password are “admin”. It is suggested to change the administrator’s default password as soon as you start to use the Router, and store it in a safe place. The password can consist of 0 to 12 alphanumeric characters, and are case sensitive.
Parameters | Description |
Current Password | Enter the current password of the router. |
New Password | Enter your new password. |
Confirmed Password | Enter your new password again for verification purposes. |
| Note: If you forget your password, you’ll have to reset the router to the |
| factory default (user name and password are both ‘admin’) by pushing |
| and holding the reset button on the back of the router for 10 seconds. |
After you finish with all settings, please click “Apply” button.
If you want to reset all settings in this page, please click “Cancel” button.
After you clicked Apply, the following message will be displayed on your web browser:
You can click “Continue” to back to previous setup page to continue on other setup procedures, or click “Apply” to reboot the router so the settings will take effect (Please wait for about 30 seconds while router is rebooting).
72