ADTRAN DG834GV manual V1.1, April

Page 17

Setup Manual for the DG834GV Integrated ADSL Modem and Wireless Router with Voice

b. After logging in, you will see the menu below.

Figure 1-11

3.Connect to the Internet:

You are now ready to configure your ADSL modem wireless router with voice to connect to the Internet. There are two ways you can configure your ADSL modem wireless router with voice to connect to the Internet:

a.Let the ADSL modem wireless router with voice Setup Wizard auto-detect the type of Internet connection you have and configure it.

b.Manually choose which type of Internet connection you have and configure it.

In either case, use to the configuration parameters your ISP provided to assure that the configuration settings for your Internet connection are correct.

4.Test your Internet connection.

From the bottom of the Setup menu, click Test. If the NETGEAR Web site does not appear within one minute, refer to Chapter 2, “Troubleshooting”.

Your ADSL modem wireless router with voice is now configured to provide Internet access for your network. Your ADSL modem wireless router with voice automatically connects to the Internet when one of your computers requires access. It is not necessary to run a dialer or login application such as Dial-Up Networking or Enternet to connect, log in, or disconnect. These functions are performed automatically by the ADSL modem wireless router with voice as needed.

Connecting the Router to the Internet

1-13

v1.1, April 2007

Image 17
Contents NETGEAR, Inc Trademarks Contents Using the Reset Button What’s in the Box? Chapter Connecting the Router to the InternetLED Descriptions Adsl Modem Wireless Router with Voice’s Front PanelAdsl Modem Wireless Router with Voice’s Rear Panel V1.1, April What You Need Before You Begin Two Setup Methods 1 Smart Wizard Setup 2 Manual SetupInternet Configuration Requirements Smart Wizard Setup Understanding Adsl Microfilters Manual SetupComputers Set to Dhcp Manually Setting Up Your Adsl Modem Wireless RouterV1.1, April Phone Port V1.1, April V1.1, April V1.1, April How to Set Up and Test Basic Wireless Connectivity Implement Appropriate Wireless Security How to Set Up and Test Basic VoIP Basic Functioning Chapter TroubleshootingTest LED Never Turns On or Test LED Stays On Power LED Not OnLAN or Adsl Internet Port LEDs Not On Troubleshooting the Web Configuration InterfaceAdsl link Troubleshooting the ISP ConnectionAdsl Internet LED Off Obtaining an Internet IP AddressTroubleshooting PPPoE or PPPoA Testing the LAN Path to Your Router Troubleshooting a TCP/IP Network Using the Ping UtilityTroubleshooting Internet Browsing Request timed out Testing the Path from Your Computer to a Remote DeviceUsing the Reset Button Restoring the Default Configuration and PasswordV1.1, April Network Protocol and Standards Compatibility Appendix a Technical SpecificationsV1.1, April Document Link Appendix B Related DocumentsV1.1, April