Back Panel Description
See Figure 3 on the previous page
The preamplifier back panel provides all input and output connections, remote control inputs and outputs, and the power connection. Back panel features and their descriptions follow.
Inputs
15Balanced Inputs: B-1, B-2
These are balanced analog source inputs with XLR connectors.
16Single-ended Inputs: S-1, S-2, S-3
These are single-ended analog source inputs with RCA connectors.
17Tape Input
This is a single-ended tape input, for use with a tape source.
18C-1 and C-2 CAST Inputs
These are CAST inputs with 4-pin bayonet connectors, for use with Krell CAST-equipped input devices.
Outputs
19 Tape Output
This single-ended analog output is used for recording the selected input
source.
20 Main Outputs
The Evolution 222 is equipped with one single-ended output with RCA con- nectors, one balanced output with XLR connectors, and two CAST preamplifi- er outputs with 4-pin bayonet connectors, for use with Krell CAST-equipped amplifiers.
Configurations
21CAN Link
These RJ-45 link connectors are connected in parallel. They are used to con- nect the Evolution 222 preamplifier to other CAN Link-enabled Krell products.
